Archive for the ‘Mac OS X’ Category

Skype remove word completion / Howto Disable spellcheck autocorrect on Mac OS X, Android Phones Tablets and IPhone iOS

Tuesday, March 14th, 2017

How-to-disable-auto-correct-on-MacOS-X-android-and-iphone

I've recently upgraded my wife's Mac Book Air Mac OS X release from Mountain Lion to latest available OS X release Yosemite and after upgrade the old version of Skype used for about 3 years without any problems (except camera issues due to mac OS X bug the old post is here) stopped working (did crashed) on Skype launch so I took few minutes to upgrade Skype as well from Skype.com Skype for Mac official download page after the quick and unproblematic Skype re-install, Skype client was back to normal with a shiny new outlook and on a first glimpse all worked like a charm but …

On the next day when I took use of temporary the upgraded Mac Book Air with the fresh new OS X Yosemite and Skype's latest app to to do a quick login with my Skype credentials noticed a very annoying autocorrect (auto spelling)  Skype behavior on any new input text message.

I have to admit the idea of autocorrect feature on a system wide scale is great however quick keyboard typers like me who are used to type more than a letter per second use to type so quickly that occasinally you do errors which you're quick to fix but anyhow errors are automatically corrected in a way that you have to retype the whole word quite often which makes your typing a hellish experience. Then the same auto-correct feature becomes a terrible experience and on any device I notice this behavior I tend to remove it immediately.

I remember  the same dictionary auto-spell check / corect behavior was present on my Android run ZTE blade 3 mobile after first Mobile boot and also present on my current iPhone 5 iOS and thus the first thing I did once I start using it is to remove autocorrect (auto spelling) feature and relax the irritation of it.

Just in case if you need to disable Spellcheck auto-correct on Android Phone or Tablet do it from

Settings -> Language & input

android-phone-tablet-disable-autocorrect-spell-check

If you happen to be using also IPhone 5 as me or  Iphone 6 / 7 to disable AutoCorrect feature on SMSes / Skype / Viber and other applications do it from Phone's:

Settings -> General

disable_Turn_off_AutoCorrect_in_IPhone_iOS

Shortly I've noticed that the auto-correct feature does not only mess up your typing in Skype but also in Mail and TweetDeck and generally any open application where you can type on Yosemite.


I've took the time to investigate quickly what was causing the new feature that bugged me so much online and came to this nice little article How to turnoff autocorrect on Mac OS X 10.11 El Captain

As the article revealed to Turn off the autocorrect Mac OS X feature you I have to go:

Finder -> System Preferences

 

stop-skype-autocorrect-annoying-macosx-yosemite-system-preferences-menu-screenshot

Click on Keyboard -> Text
and turn  Autocorrect off by unchecking Correct spelling automatically

stop-skype-autocorrect-annoying-macosx-yosemite-system-preferences-keyboard-menu-screenshot

By doing this autocorrect spelling is disabled for all applications, however for some people it might be handy to leave the correct feature for Mail app or Microsoft Office (Microsoft Word / Excel) etc. and only turn off (disable) the autorrect feature per application side.

You can  do this in the separate Applications (of choise where you need auto spelling) from  Edit Menu under Spelling and Grammer and enable / disableCheck Spelling While Typing

stop-skype-autocorrect-annoying-macosx-yosemite-spelling-and-grammar-menu-screenshot


Tadam Enjoy ! 🙂

 

Share this on

Adobe PDF Reader Mac OS X disable (Automatic) Update annoying prompt popping up every now and then

Wednesday, June 8th, 2016

Adobe-Reader-icon

Generally recent'y I've been more and more convinced the less you update the better. I've recently installed Adobe Reader on the Mac Book Air of Svetlana, cause I still have some illusions some PDFs are visible more clearly with Adobe. And soon I was unpleasently suprised that once installed Adobe automatically added auto-update service to the Mac and an auto-update policy that is popping up all the time with offers to update.

This could get crazy every normal person that prefer to not update software so often. There are not much people I know of that like to be puzzled on every next release about the new functionality he don't need anyways but I guess adobe's company aggressiveness escalated nowadays.

Thanksfully as I've googled quickly I found the fix on the common site for Mac problems Mac OS X Daily here

FlashUpdateNotification_annoying-prompt-how-to-disable

To get rid of the m'f'in Automatic Adobe Reader update

 

 Launch Terminal (located in /Applications/Utilities/)
* At the command prompt, paste this command exactly

defaults write com.adobe.AdobeUpdater.Admin Disable.Update -bool yes

* Hit return to execute the command 

You will get no output but anyways this nice command will have created for you inside your home directory (/Library/Preferences/) the file Preferences/com.adobe.AdobeUpdater.Admin.plist

You check the file's existence with command:

 

svetlana@localhost:~$ ls -al ~/Library/Preferences/com.adobe.AdobeUpdater.Admin.plist
-rw——-  1 svetlana  staff  62 Jun  6 19:52 /Users/svetlana/Library/Preferences/com.adobe.AdobeUpdater.Admin.plist

 

The conent of the file is simple it sets a boolean valiable of Disable.Update to True 

 

cat ~/Library/Preferences/com.adobe.AdobeUpdater.Admin.plist
bplist00?^Disable.Update

 

This will guarantee you that rebooting your Mac (which I guess was some 6 months ago or just a simple user logging out will not prompt you with the sh*tty annoying Adobe Update Manager

Share this on

Word 2011 Check spelling for Mac OS X 2011 – Word check text in Mac OS X Office

Monday, February 29th, 2016

office-for-mac-2011-logo
 

If you happen to be running Mac OS X powered notebook and have recently installed Microsoft Office 2011 for Mac OS because you used to migrate from a Windows PC, you will probably suprrised that your Native Language Dictionary check you used heavily on Windows might be not performing on Mac.
This was exactly the case with my wife Svetlana and as she is not a computer expert and I'm the IT support at home I had to solve it somehow.

Luckily Office 2011 for Mac OS X which I have installed earlier comes with plenty of foreign-languages such as Russian, Bulgarian, Czech, French, German, UK English, US English etc.
Proofing tools is very handy especially for people like my wife who is natively Belarusian and is in process of learning Bulgarian, thus often in need to check Bulgarian words spelling.

By Default the Check spelling on Office package was set to English, there is a quick way to change this to a certain text without changing the check-spelling default from English, the key shortcut to use is:

I. Press Mac command (key) + A – To select All text in opened document (in our case text was in Bulgarian)

command-a-mac-os-x

Click Word window menu and:
 

Choose Tools→Language


and select Bulgarian (or whatever language you need check spelling for.

If you need to change the Language default for all time, again you can do it from Tools

 

 

 Tools→Language

 

language-menu-on-mac-os-x-microsoft-word-office-2011-package-screenshot

II. The Language dialog will appear and you'll see a list of languages to choose. 

select-language-menu-screenshot-ms-word-2011-on-mac-os-x

III. Next a Pop-up Dialog will ask you whether you're sure you want to change the default language to the language of choice in my case this was Russian.

language-default-dialog-mac-osx-word-2011-office-on-mac-change-default-spelling-language

That's it check spelling default will be aplpied now to Word normal template, so next time you open a document your default spelling choice will set

Share this on

Use mac PC built-in camera to make / take pictures on Mac OS X macbookair notebook with Photo Booth

Friday, February 26th, 2016

take-picture-or-video-with-built-in-camera-on-MacOSX-PhotoboothLOGO

It seems we lost our Good high quality Digital Camera somewhere and I was in need urgently to make a good quality photo (my ZTE Phone) has a very bad camera, so I got the idea to use Macbookair's camera as it has better
resolution to picture my present a  Tank Tort 🙂 hand made by my wife as a present for the Day of the Defender of the Fatherland which is a major feast in Russia, Belarus and many of the ex-Soviet Union members communist countries.

Actually using build in camare in MacBookAir is a handy thing for people mising at the moment a good high quality digital camera as it is thin and light and build in MacBook cam can be used to make Videos and Pictures exactly the same way
as an ordinary Tablet Computer is used so commonly nowadays by many:

In other words I needed for the Mac OS X equivalent to Cheese's (Photo and Video) capturer program for Linux.

Luckily for people interested in using their Mac OS notebook as a amateur camera this is easy by using default shipped Mac Application called:

Photo Booth app

To Launch Photo Booth app it just look it up in Finder and double click it:

PhotoBooth-how-to-take-photos-on-macosx

Clicking the large red button underneath the preview area will take a picture after an optional countdown.

Tort Tank of Svetka

Besides being able to capture Video and Pictures from Mac's camera it could add also some nice effects to taken pictures and videos (supports a basic video editing) features and effects.

The effects you can choose are are: Sepia, Black and White, Glow, Comic Book, Normal, Colored Pencil, Thermal Camera, X-Ray, and Pop Art. There are also effects that change the person in the picture using these effects: Bulge, Dent, Twirl, Squeeze, Mirror, Light Tunnel, Fish Eye, and Stretch. Actually  photographic filters of Photo Booth are very similar to Adobe Photoshop.

make-picture-on-mac-photobooth-effects-screenshot
By default Photo Booth will create picture, howver

Photo Booth saves your photos as JPEG files in a folder named Photo Booth, located in your home folder.

Choose File > Reveal in Finder

to see your picture files.

A much better way to be able to easily see and access all taken Pictures and Videos with Photo Booth is to

 

open Terminal

 

and type:

——-
 

 

$ cd Pictures
$ ln -s Photo\ Booth\ Library/Pictures/ PhotoBoothPics


This will make Link to pictures be easily accessible from your Finder -> Pictures folder
 
Applying custom photo backgrounds

A very useful feature of Photo Booth is that the user can apply backdrops to provide an effect similar to a green screen. When a backdrop is selected, a message appears telling the user to step away from the camera. Once the background is analyzed, the user steps back in front of the camera and is shown in front of the chosen backdrop.

For people who prefer to take photos using a console program on Mac OS I guess you should take a look at ffpeg
Here is one more snapshot of the Tort Tank snapshot made with the Macbookair of Svetlana 🙂

Tort Tank


P.S. If you like the Tort Tank and you happen to live in Sofia Bulgaria, you can order it  by dropping me a comment with request 🙂

Enjoy ! 🙂

Share this on

How to install Winrar on Mac OS X on Console and Graphical Interface – IZIP and Keka Free archivers short review

Friday, February 19th, 2016

howto-install-winrar-free-gui-program-for-mac-osx-notebook-pc

If you're looking for just Mac OS X, console version of rar and unrar then standard WinRar website binaries for Mac should be perfect for you.
If you're an advanced Mac OS X user with UNIX background and you've already installed Mac Ports or Brew – The Missing package manager for Mac OS X
To install WinRar on Mac (with brew) with:
 

macosx# brew install unrar


If you're using MacPorts instead:
 

macosx:/home$ sudo port install unrar


However console version isn't the best choice for my wife which is not a console ninja, so I had to look and install some oher Graphic Interface program 🙂
As I don't like using AppleStore (I can't even properly register for an Apple Store ID,as I'm required to fill in my credit card … )
Hence I looked online on some WinRar dearchiver GUIs and  found IZip which is natively a ZIP archiver but also supports .RAR Archives.
Though IZIp website give the impression IZip is a great tiny prog, once installing the .DMG downloaded from the website and installing into Applications it turned out IZip is currently crashing on the Mac Book Air with Mac OS X 10.8.5Mountain Lion

If you want a simplistic interface program you would probably want to check out UnrarX though I personally didin't liked that one because it is not properly handing UTF-8 and CP-1251 filenames written in Russian, Bulgarian Cyrillic and probably also Chineese, Viatnamese and other exotic language encodings.
After few more minutes of searching I finally got KEKA – The Free  Mac OSX file archiver.

keka_winrar-archive-unarchive-free-program-for-macosx-icon

Though the program Logo is a little scary, Keka turned to be very nice tiny, easy  to install WinRAR GUI interfaced program for Mac OS X and the installation comes to standard download and run of .DMG file and moving it to the Finder Applications.

Once installed, if you turn to have a .rar file association issues (by default in my case) files were opened with VLC. To change the file type association of a certain file on the Mac I've had to press Command (button) + I over the .rar extensioned file, e.g:

  • Command + I
  • Click to expand the “Open with” section within that files info screen
  • From the pull down menu, select the application you want to open this specific file with
  • Close the Get Info window
     

change-mac-file-association-to-rar-kaka-free-winrar-winzip-archive-dearchive-macosx

Share this on

How to use wget and curl via HTTP Proxy server / How to set a HTTPS proxy server on a bash shell on Linux

Wednesday, January 27th, 2016

linux-ssl-proxy-configuration-from-command-line-with-wget-and-curl-howto

I've been working a bit on a client's automation, the task is to automate process of installations of Apaches / Tomcats / JBoss and Java servers, so me and colleagues don't waste too
much time in trivial things. To complete that I've created a small repository on a Apache with a WebDav server with major versions of each general branch of Application servers and Javas.
In order to access the remote URL where the .tar.gz binaries archives reside, I had to use a proxy serve as the client runs all his network in a DMZ and all Web Port 80 and 443 HTTPS traffic inside the client network
has to pass by the network proxy.

Thus to make the downloads possible via the shell script, writting I needed to set the script to use the HTTPS proxy server. I've been using proxy earlier and I was pretty aware of the http_proxy bash shell
variable thus I tried to use this one for the Secured HTTPS proxy, however the connection was failing and thanks to colleague Anatoliy I realized the whole problem is I'm trying to use http_proxy shell variable
which has to only be used for unencrypted Proxy servers and in this case the proxy server is over SSL encrypted HTTPS protocol so instead the right variable to use is:
 

https_proxy


The https_proxy var syntax, goes like this:

proxy_url='http-proxy-url.net:8080';
export https_proxy="$proxy_url"

how-to-set-https_proxy_url-on-linux-freebsd-openbsd-bsd-and-unix-from-terminal-console

Once the https_proxy variable is set  UNIX's wget non interactive download tool starts using the proxy_url variable set proxy and the downloads in my script works.

Hence to make the different version application archives download work out, I've used wget like so:
 

 wget –no-check-certificate –timeout=5 https://full-path-to-url.net/file.rar


For other BSD / HP-UX / SunOS UNIX Servers where  shells are different from Bourne Again (Bash) Shell, the http_proxy and  https_proxy variable might not be working.
In such cases if you have curl (command line tool) is available instead of wget to script downloads you can use something like:
 

 curl -O -1 -k –proxy http-proxy-url.net:8080 https://full-path-to-url.net/file.rar

The http_proxy and https_proxy variables works perfect also on Mac OS X, default bash shell, so Mac users enjoy.
For some bash users in some kind of firewall hardened environments like in my case, its handy to permanently set a proxy to all shell activities via auto login Linux / *unix scripts .bashrc or .bash_profile that saves the inconvenience to always
set the proxy so lynx and links, elinks text console browsers does work also anytime you login to shell.

Well that's it, my script enjoys proxying traffic 🙂
 

Share this on

How to update macos from terminal / Check and update remotely Mac OS X software from console

Friday, October 23rd, 2015

../files/how-to-update-mac-osx-notebook-from-terminalsoftware-update-command-line-mac-screnshot-1

If you happen to have to deal with Mac OS X (Apple) notebook or Desktop PC (Hackintosh) etc. and you’re sysadmin or console freak being pissed off Mac’s GUI App Store update interface and you want to “keep it simple stupid” (KISS) in an Debian Linux like apt-get manner then you can also use Mac’s console application (cli) terminal to do the updates manually from command line with:

softwareupdate

command.

how-to-update-mac-osx-notebook-from-terminalsoftware-update-command-line-mac-screnshot

To get help about softwareupdate pass it on the -h flag:

softwareupdate -h

1. Get a list of available Mac OS updates

Though not a very likely scenario of course before installing it is always a wise thing to see what is being updated to make sure you will not upgrade something that you don’t want to.
This is done with:

softwareupdate -l

However in most cases you can simply skip this step as updating directly every package installed on the Mac with a new version from Apple will not affect your PC.
Anyways it is always a good idea to keep a backup image of your OS before proceeding with updates with let’s say Time Machine Mac OS backup app.

2. Install only recommended Updates from Apple store

softwareupdate -irv


Above will download all updates that are critical and thus a must to have in order to keep Mac OS security adequate.
Translated into Debian / Ubuntu Linux language, the command does pretty much the same as Linux’s:

apt-get –yes update

3. Install All Updates available from AppleStore

To install absolutely all updates provided by Apple’s package repositories run:

softwareupdate -iva

One note to make here is that always when you keep updating make sure your notebook is switched on to electricity grid otherwise if due to battery discharge it shutoffs during update your Mac will crash in a very crappy hard to recover state that might even cost you a complete re-install or a need to bring a PC to a Mac Store technical support guy so beware, you’re warned!

4. Installing all updates except Specific Softwares from Terminal

Often if you have a cracked software or a software whose GUI interface changed too much and you don’t want to upgrade it but an update is offered by Apple repos you can add the -i ingnore option:

softwareupdate -i [update_name(s)]

For example:

softwareupdate -i Safari-version-XXXX

5. View Mac OS Software Update History

The quickest way to see the update history is with System Information app, e.g.:

/Applications/Utilities/System Information.app


Share this on

How to colorize your Mac OS X Terminal – Beautify your Mac OS terminal and proper Page Up / Page Down and Home / End bindings

Thursday, March 19th, 2015


If you're a sysadmin (like me) or a programmer and love working on console most of the time on a recently bought Apple (Mac) PC, probably not like that by default Terminal App lacks nice color highlighting, color highlighly is already standard on Ubuntu / Debian / Mint and many of the streamline Linux distros for years, so it's weird that the shiny Mac lacks that in console 🙂
 I'm not blaming Mac OS developers for shipping by default Mac's console so much greyish as most Mac userbase almost never use terminals, however adding some appearance candy makes my boring digital life much more entertaining.

beautify-add-colors-to-Mac-OSX-default-app-program-add-shiny-clolors-improve-mac-os-x-terminal-screenshot.png

Put in your home directory $HOME/.profile or in .bash_profile file below code:

 

vim ~/.profile
PS1='\[\e[0;33m\]\u\[\e[0m\]@\[\e[0;32m\]\h\[\e[0m\]:\[\e[0;34m\]\w\[\e[0m\]\$ '
export PATH="/opt/local/bin:/opt/local/sbin:$PATH"
export CLICOLOR=1
export LSCOLORS=ExFxBxDxCxegedabagacad
alias ls='ls -GFh'

 

echo "PS1='\[\e[0;33m\]\u\[\e[0m\]@\[\e[0;32m\]\h\[\e[0m\]:\[\e[0;34m\]\w\[\e[0m\]\$ '
export PATH="/opt/local/bin:/opt/local/sbin:$PATH"" >> ~/.profile

echo "export CLICOLOR=1" >> ~/.profile
echo "export LSCOLORS=ExFxBxDxCxegedabagacad" >> ~/.profile
echo "alias ls='ls -GFh'"  >> ~/.profile

 


PS1 with above string do colorize Terminal's default “username@hostname:cwd $” following alias makes by default ls (dir) command to have colors enabled (show files and folders in shiny colors like on GNU / Linux). As you see the ls command perameter -G which actually adds colors is the same like in FreeBSD (since very big part of Mac OS is based on BSD UNIX utils), -F makes directories to be marked with / and -h (stands for human readable).
If you want to enable terminal ls colors for all existing Mac computer users open /etc/profile and (uncomment) / include:

 

export CLICOLOR=1
export LSCOLORS=GxFxCxDxBxegedabagaced

 


If you want to customize further Mac OS's default Terminal App (add different Colorize Theme), change default shell, change default Title, add Transparency, Change Term Encoding etc.  go and check settings in:
 

Terminal -> Settings


Mac-OS-default-Terminal-shell-settings-interface-change-theme-mountain-lion-screenshot
One really annoying thing about Mac OS X terminal for being users is that by default Command + D which is like CTRL + D on a non-Mac PC sends Split Window command, splitting the screen by two,  if you're a new Mac user like me you will have to get used to Command + Shift + D which is the Mac equivalent of regular PC keyboard CTRL + D. Note that it is not possible to move between Splitted screens but instead the upper part of the split screen is just like a buffer where old output from terminal is put and can be used to keep an eye constantly on old content displayed on terminal …
If you're too lazy to edit files and stuff and just want to receive already well configured Terminal which has many of the features of gnome-terminal / konsole which are not there in  Mac's default Terminal App, just download and use iTerm2 (OS X Terminal Replacement)

iterm2-mac-osx-mounta-lion-10.8.5-best-terminal-application-for-mac-OSX-screenshot

Once over with Terminal customizations if you happen to use VI Improved (VIM) text editor as an editor of choice on Mac create at least following .vimrc in your HOME directory
 

$ vim ~/.vimrc

" End
map <C-E> <End>
imap <C-E> <C-O><End>

" Home
map <C-A> <Home>
map <C-A> <C-O><Home>

 


This maps Command + A / Command + E to (emulate) act like normal PC Home / End Keyboard key button, to emulate Page Up / Page Down keys on Mac OS keyboard inside Terminal app use Fn (key) + Up / Down arrows.
To make HOME / END buttons answer to Control + A / E on a Terminal App level:

 

Inside Terminal.app
Open the Preferences window (CMD+,)
Click the Settings tab
Select your current Settings theme, and click on the Keyboard tab
Edit (or Add) the entry for Home
Set Action: to send string to shell:
Set the string to \001 (or press Ctrl+a)
Edit (or Add) the entry for End
Set Action: to send string to shell:
Set the string to \005 (or press Ctrl+e)
Edit (or Add) the entry for Page Up
Set Action: to send string to shell:
Set the string to \033[5~ (copy and paste this in)
Edit (or Add) the entry for Page Down
Set Action: to send string to shell:
Set the string to \033[6~ (copy and paste this in)
Close the settings window.

Share this on

Free Software Remote Desktop for Mac OS X – CoRD simple RDP remote desktop for Mac

Monday, August 4th, 2014

free-software-remote-desktop-client-to-connect-to-windows-rdp-for-MAC-OSX-CoRD-logo
If you're admin using Mac OS X Desktop or casually on a place where you have no access to a Windows / Linux PC (only have access to your girlfriend of wife MAC OS notebook) and you need to administrate Windows hosts remotely out of office hours (from home), you will need some remote desktop client for Mac OS X.

I was just recently in that situation as we were guests to a friend in Shabla village nearby Sea coast and the only near PC, I had was my wife's MacBook Air running Mac OS X.

I looked in google to see if there is some default RDP (remote desktop protocol) client like MS Windows remote desktop command line client, i.e. (yes there is way to invoke remote desktop on Windows from command line 🙂 ):

mstsc [] [/v:] [/admin] [/f[ullscreen]] [/w:] [/h:] [/public] | [/span] [/edit “connection file”] [/migrate] [/?]

remote-desktop-run-from-windows-command-line-rdp-command-line-ms-windows-screenshot

I also looked if there is Mac OS X version ofLinux's rdesktop (command) or RDP Linux GUI remmina 
however  I didn't find direct port of em, neither there is default integrated RDP Client on Mac OS X, thus after researching a bit further I tried installing the first returned result in Google which was leading to Apple's AppStore – Apple – Remote Desktop.

I tried installing the clicking it but it seemed my wife, didn't know her AppStore as it was her cousin which earlier configured her Mac OS PC on laptop initial install time. Contacting her cousin to ask for the password was a time eater as well as I was lazy to create new appstore account (plus I always prefer to use free software alternative when possible) …  did a quick search in Google whether there is some Open Source / Free Software Remote Desktop Client for Mac OS X and I found CoRD – Mac OS X remote desktop client for Microsoft Windows computers using the RDP protocol.
CoRD was originally ported from UNIX program rdesktop.
To have CoRD working you will need as a minimum requirement Mac OS X version 10.5 or later.

CoRD-Free-Software-Open_Source-remote-desktop-client-for-mac-osx
Here is CoRD's description quoted from its SourceForge website:

CoRD: Simple RDP Remote Desktop

Macs interact well with Windows, and with CoRD the experience is a bit smoother. Great for working on the office terminal server, administrating servers or any other time you'd like your PC to be a bit closer without leaving your Mac. CoRD allows you to view each session in its own window, or save space with all sessions in one window. Scale session windows to whatever size fits you—the screen is resized automatically. Enter full screen mode and feel like you're actually at the computer. The clipboard is automatically synchronized between CoRD and the server. For system administrators, CoRD creates a simpler workflow by allowing you to save server information, then quickly connect to that server by using HotKeys or the server drawer. This makes quickly connecting to a specific server easy, even when managing many servers.

Installing CoRD is pretty, straight forward, just download unzip the archive and run it:

cord-remote-desktop-free-software-client-mac-osx-install-warning-screenshot

cord-remote-desktop-free-software-client-mac-osx-install-warning-screenshot.png

cord-open-source-rdp-client-mac-osx

To later run Cord either look it up in Finder or if you prefer like me to access it from command line, you will need to export CoRD PATH in Mac Terminal $PATH variable:

add-cord-remote-desktop-lcient-command-to-default-path-mac-osx

As you see in above screenshot to find out which directory is CoRD located, I've grepped through the processes with

ps ax | grep cord

and then added it to PATH with:

export PATH=$PATH:/Users/svetlana/Application/CoRD.app/Contents/MacOS/

Remembering CoRD to type it each time is annoying, thus to make CorD be accessed like on Linux with rdesktop (easy to remember command), I've used alias:

alias rdesktop='CoRD'

To make the new PATH and alias permanent for the user, I've added it to (/Users/svetlana) – ~/.profile

echo "export PATH=$PATH:/Users/svetlana/Application/CoRD.app/Contents/MacOS/" >> ~/.profile
echo "alias rdesktop='CoRD'" >> ~/.profile


Current CoRD MacOSX version is 0.5.7, for personal ease if I need to install it in future time, I've made my own mirror of cord here.

There is also Microsoft Remote Desktop client for Mac OS 2.1.1 however this version was released back in 2011 and is outdated (not supported for use with Mac OS X v10.7 (Lion) or later).

Share this on