Posts Tagged ‘state information’

Check your GNU / Linux Desktop for all used “Evil” Non-free ( proprietary ) Software with VRMS

Wednesday, June 26th, 2013

Virtual Richard  Stallman VRMS Check what non free software is on your GNU Linux system

If you want to be strict on using only Free Software (in a as in freedom sense), just like Richard Stallman. You will be happy to know there is a tool in Linux called Virtual Richard Stallman ( vrms – report of installed non-free software ) 🙂

On launch vrms simply lists, all software and software documentation installed on Debian GNU / Linux  that is not 100% free software licenses / GPL compatbile. This is software installed via non-free  package Debian repositories or somehow not sticking to the standards of Debian Free Software Guidelines. Of course living with 100% free software is only for the hard core free software evangelists and rarely there is someone who can use computer on daily basis without some bits of proprietary software like flashplugin-nonfree, Skype rar, unrar. I tried for a while living on only 100% free software but didn't succeeded cause some non-free software is still a must to be able to not detach from "Digital Society". Living on only free software is not easy especially if you want to have normal multimedia  stuff on Desktop. Anyways even if you don't plan to purge your non-free software vrms is useful to list what free-software is installed on PC.

noah:~# apt-cache show vrms|grep -i description

Description-en: virtual Richard M. Stallman
 The vrms program will analyze the set of currently-installed packages
 on a Debian-based system, and report all of the packages from the
 non-free and contrib trees which are currently installed.
 .

Install vmrs with:

noah:~# apt-get install --yes vrms

 

Reading package lists… Done
Building dependency tree      
Reading state information… Done
The following packages were automatically installed and are no longer required:
  liboggkate1 xulrunner-10.0
Use 'apt-get autoremove' to remove them.
The following NEW packages will be installed:
  vrms
0 upgraded, 1 newly installed, 0 to remove and 101 not upgraded.
Need to get 0 B/13.0 kB of archives.
After this operation, 102 kB of additional disk space will be used.
Retrieving bug reports… Done
Parsing Found/Fixed information… Done
Selecting previously unselected package vrms.
(Reading database … 226672 files and directories currently installed.)
Unpacking vrms (from …/apt/archives/vrms_1.16_all.deb) …
Processing triggers for man-db …
Setting up vrms (1.16) …

  Below is a list of all non-free software installed on my Debian 7 Thinkpad:

noah:~# vrms

                Non-free packages installed on noah

acroread                            Adobe Acrobat Reader: Portable Document Format file vi
acroread-data                       data files for acroread
acroread-dictionary-en              English dictionary for for acroread
acroread-escript                    Adobe EScript Plug-In
acroread-l10n-en                    English language package for acroread
firmware-iwlwifi                    Binary firmware for Intel PRO/Wireless 3945 and 802.11
frogatto-data                       2D platformer game starring a quixotic frog
mame                                Multiple Arcade Machine Emulator (MAME)
mame-tools                          Tools for MAME and MESS
mess                                Multi Emulator Super System (MESS)
mess-data                           Data files for the Multi Emulator Super System (MESS)
mozilla-acroread                    Adobe Acrobat(R) Reader plugin for mozilla / konqueror
nikto                               web server security scanner
opera                               Fast and secure web browser and Internet suite
rar                                 Archiver for .rar files
skype                               Skype
teamviewer                          TeamViewer (Remote Control Application)
unrar                               Unarchiver for .rar files (non-free version)
xmame-tools                         Transitional package for mame-tools

                Contrib packages installed on noah

cbedic                              Text-mode Bulgarian/English Dictionary
dosemu                              DOS Emulator for Linux
flashplugin-nonfree                 Adobe Flash Player – browser plugin
frogatto                            2D platformer game starring a quixotic frog
gnome-video-arcade                  Simple MAME frontend
mess-desktop-entries                Desktop entries for MESS ROMs
ttf-mscorefonts-installer           Installer for Microsoft TrueType core fonts
winetricks                          package manager for WINE to install software easily

     Contrib packages with status other than installed on noah

gxmame                              ( dei)  GTK XMame frontend

  19 non-free packages, 0.8% of 2531 installed packages.
  9 contrib packages, 0.4% of 2531 installed packages.

 

If you want to go the Stallman way and be a 100% Free Software user, Go free and purge all "evil" non-free software  🙂 issue:

# for i in $(vrms -q|grep -v 'Contrib packages'|grep -v 'Non-free'|awk '{ print $1 }' | awk 'NF'); \
do \
apt-get remove --yes $i; dpkg --purge $i; done

 

Linux Currency convert GUI tool KeuroCalc / Convert world currencies Desktop Linux application, Convert USD to EUR

Thursday, April 25th, 2013

keurocalc Linux convert us dollars to euro and to rest of major world currencies

If you happen to run a small business or you're just an adventurer who use Linux for his notebook Desktop. Sooner or later you will end up needing Linux software to convert between world currencies. Some might argue that such a software is obsolete since already there are the Google Currency Converter and plenty of other (online) web currency converter sites. However for people like to use desktop applications like me it is much better to use a separate desktop tool which do currency convertion. If this is the case with and you happen to use Debian GNU / Linux, Ubuntu Fedora or any other main stream Linux distribution on your Linux powered Laptop or Tablet you will be surely happy to know about KEuroCalc – Universal Currency Converter. As all "K"-named starting Linux apps unfortunately keurocalc is using QT KDE graphic library and thus whenever used on GNOME it starts a bunch of KDE services (kedinit,klauncher, kded), however the load of this few on any modern notebook or PC is neglectably low so for most users the only disadvantage of kerocalc might be interface is looking a bit different compared to rest of Gnome GTK+ programs.

To install keurocalc on deb based Linuces e.g. – Debian / Ubuntu, ArchLinux ..:

noah:~# apt-cache show keurocalc|grep -i description -A 3

Description: universal currency converter and calculator – binary package
 KEurocalc is a universal currency converter and calculator.
 It downloads latest exchange rates directly from the
 European Central Bank and the Federal Reserve Bank of New York.
 

noah:~# apt-get install --yes keurocalc

Reading package lists… Done
Building dependency tree      
Reading state information… Done
The following NEW packages will be installed:
  keurocalc
0 upgraded, 1 newly installed, 0 to remove and 23 not upgraded.
Need to get 0 B/87.8 kB of archives.
After this operation, 319 kB of additional disk space will be used.
Selecting previously deselected package keurocalc.
(Reading database … 393466 files and directories currently installed.)
Unpacking keurocalc (from …/keurocalc_1.0.3-2_amd64.deb) …
Processing triggers for hicolor-icon-theme …
Processing triggers for man-db …
Processing triggers for menu …
Processing triggers for gnome-menus …
Processing triggers for desktop-file-utils …
Setting up keurocalc (1.0.3-2) …
Processing triggers for menu …

On Fedora, CentOS and rest of RPM based Linux distros keurocalc is installable too out of default package repositories:

[root@fedora ~]# yum -y -q install keurocalc
....

 

Here is a snapshot of keurocalc GUI interface;

Linux Universal Currency Converter Keurocalc

Keurocalc Linux universal currency converter settings screenshot

As you see from settings screenshot, information about rates can be obtained from 2 sources; – European Central Bank and New York Federal Reserve Bank. I give a try also to Euro, no network access (fixed rates only) method but unfortunately by choosing it you can only convert between Fixed Currencies (currencies which are already not in use – in EU member states who dropped their local currencies in favor of EURO).

I've tested the program and it works good, the disadvantage is convertion between some of the World currencies of countries with non-transparent planned (Soviet like) economies for example Belarus is not among app list of convertable currencies.

Creating data backups on Debian and Ubuntu servers with Bacula professional backup tool

Wednesday, April 17th, 2013

Bacula professional GNU Linux Freebsd Netbsd backup software logo with bat

1. Install Bacula Backup System

root@pcfreak:~# apt-cache show bacula |grep -i description -A 5

Description: network backup, recovery and verification – meta-package
 Bacula is a set of programs to manage backup, recovery and verification
 of computer data across a network of computers of different kinds.
 .
 It is efficient and relatively easy to use, while offering many advanced
 storage management features that make it easy to find and recover lost or
 damaged files. Due to its modular design, Bacula is scalable from small
 single computer systems to networks of hundreds of machines.
 .

root@pcfreak:~# apt-get install bacula

 

Reading package lists… Done
Building dependency tree      
Reading state information… Done
The following extra packages will be installed:
  bacula-client bacula-common bacula-common-sqlite3 bacula-console bacula-director-common bacula-director-sqlite3 bacula-fd bacula-sd
  bacula-sd-sqlite3 bacula-server bacula-traymonitor libsqlite0 mt-st mtx sqlite sqlite3
Suggested packages:
  bacula-doc dds2tar scsitools sg3-utils kde gnome-desktop-environment sqlite-doc sqlite3-doc
The following NEW packages will be installed:
  bacula bacula-client bacula-common bacula-common-sqlite3 bacula-console bacula-director-common bacula-director-sqlite3 bacula-fd bacula-sd
  bacula-sd-sqlite3 bacula-server bacula-traymonitor libsqlite0 mt-st mtx sqlite sqlite3
0 upgraded, 17 newly installed, 0 to remove and 0 not upgraded.
2 not fully installed or removed.
Need to get 2,859 kB of archives.
After this operation, 6,992 kB of additional disk space will be used.
Do you want to continue [Y/n]? Y
Get:1 http://security.debian.org/ squeeze/updates/main bacula-common amd64 5.0.2-2.2+squeeze1 [637 kB]
Get:2 http://security.debian.org/ squeeze/updates/main bacula-common-sqlite3 amd64 5.0.2-2.2+squeeze1 [102 kB]
Get:3 http://security.debian.org/ squeeze/updates/main bacula-console amd64 5.0.2-2.2+squeeze1 [67.6 kB]
Get:4 http://security.debian.org/ squeeze/updates/main bacula-director-common amd64 5.0.2-2.2+squeeze1 [56.6 kB]
Get:5 http://security.debian.org/ squeeze/updates/main bacula-director-sqlite3 amd64 5.0.2-2.2+squeeze1 [308 kB]
Get:6 http://security.debian.org/ squeeze/updates/main bacula-sd amd64 5.0.2-2.2+squeeze1 [459 kB]
Get:7 http://security.debian.org/ squeeze/updates/main bacula-sd-sqlite3 amd64 5.0.2-2.2+squeeze1 [435 kB]
Get:8 http://security.debian.org/ squeeze/updates/main bacula-server all 5.0.2-2.2+squeeze1 [48.5 kB]
Get:9 http://security.debian.org/ squeeze/updates/main bacula-fd amd64 5.0.2-2.2+squeeze1 [124 kB]
Get:10 http://security.debian.org/ squeeze/updates/main bacula-client all 5.0.2-2.2+squeeze1 [48.5 kB]
Get:11 http://security.debian.org/ squeeze/updates/main bacula all 5.0.2-2.2+squeeze1 [1,030 B]
Get:12 http://security.debian.org/ squeeze/updates/main bacula-traymonitor amd64 5.0.2-2.2+squeeze1 [70.0 kB]
Get:13 http://ftp.uk.debian.org/debian/ squeeze/main sqlite3 amd64 3.7.3-1 [100 kB]
Get:14 http://ftp.uk.debian.org/debian/ squeeze/main libsqlite0 amd64 2.8.17-6 [188 kB]
Get:15 http://ftp.uk.debian.org/debian/ squeeze/main sqlite amd64 2.8.17-6 [22.0 kB]
Get:16 http://ftp.uk.debian.org/debian/ squeeze/main mtx amd64 1.3.12-3 [154 kB]
Get:17 http://ftp.uk.debian.org/debian/ squeeze/main mt-st amd64 1.1-4 [35.6 kB]                                                            
Fetched 2,859 kB in 6s (471 kB/s)                                                                                                           
Selecting previously deselected package bacula-common.
(Reading database … 86693 files and directories currently installed.)
Unpacking bacula-common (from …/bacula-common_5.0.2-2.2+squeeze1_amd64.deb) …
Adding user 'bacula'… Ok.
Selecting previously deselected package bacula-common-sqlite3.
Unpacking bacula-common-sqlite3 (from …/bacula-common-sqlite3_5.0.2-2.2+squeeze1_amd64.deb) …
Selecting previously deselected package bacula-console.
Unpacking bacula-console (from …/bacula-console_5.0.2-2.2+squeeze1_amd64.deb) …
Processing triggers for man-db …
Setting up bacula-common (5.0.2-2.2+squeeze1) …
Selecting previously deselected package bacula-director-common.
(Reading database … 86860 files and directories currently installed.)
Unpacking bacula-director-common (from …/bacula-director-common_5.0.2-2.2+squeeze1_amd64.deb) …
Selecting previously deselected package sqlite3.
Unpacking sqlite3 (from …/sqlite3_3.7.3-1_amd64.deb) …
Selecting previously deselected package libsqlite0.
Unpacking libsqlite0 (from …/libsqlite0_2.8.17-6_amd64.deb) …
Selecting previously deselected package sqlite.
Unpacking sqlite (from …/sqlite_2.8.17-6_amd64.deb) …
Selecting previously deselected package bacula-director-sqlite3.
Unpacking bacula-director-sqlite3 (from …/bacula-director-sqlite3_5.0.2-2.2+squeeze1_amd64.deb) …
Selecting previously deselected package mtx.
Unpacking mtx (from …/mtx_1.3.12-3_amd64.deb) …
Selecting previously deselected package bacula-sd.
Unpacking bacula-sd (from …/bacula-sd_5.0.2-2.2+squeeze1_amd64.deb) …
Selecting previously deselected package bacula-sd-sqlite3.
Unpacking bacula-sd-sqlite3 (from …/bacula-sd-sqlite3_5.0.2-2.2+squeeze1_amd64.deb) …
Selecting previously deselected package bacula-server.
Unpacking bacula-server (from …/bacula-server_5.0.2-2.2+squeeze1_all.deb) …
Selecting previously deselected package bacula-fd.
Unpacking bacula-fd (from …/bacula-fd_5.0.2-2.2+squeeze1_amd64.deb) …
Selecting previously deselected package bacula-client.
Unpacking bacula-client (from …/bacula-client_5.0.2-2.2+squeeze1_all.deb) …
Selecting previously deselected package bacula.
Unpacking bacula (from …/bacula_5.0.2-2.2+squeeze1_all.deb) …
Selecting previously deselected package bacula-traymonitor.
Unpacking bacula-traymonitor (from …/bacula-traymonitor_5.0.2-2.2+squeeze1_amd64.deb) …
Selecting previously deselected package mt-st.
Unpacking mt-st (from …/archives/mt-st_1.1-4_amd64.deb) …
Processing triggers for man-db …
Setting up acct (6.5.4-2.1) …
Setting up bacula-director-common (5.0.2-2.2+squeeze1) …
Setting up bacula-director-sqlite3 (5.0.2-2.2+squeeze1) …
config: Running dbc_go bacula-director-sqlite3 configure
Stopping Bacula Director…:.
 *** Checking type of existing DB at /var/lib/bacula/bacula.db: None
 *** Will create new database at this location.
dbconfig-common: writing config to /etc/dbconfig-common/bacula-director-sqlite3.conf

Creating config file /etc/dbconfig-common/bacula-director-sqlite3.conf with new version
creating database bacula.db: success.
verifying database bacula.db exists: success.
populating database via sql…  done.
Processing configuration…Ok.
Starting Bacula Director…:.
Setting up bacula-sd (5.0.2-2.2+squeeze1) …
Starting Bacula Storage daemon…:.
Setting up acct (6.5.4-2.1) …
insserv: warning: script 'K02courier-imap' missing LSB tags and overrides
insserv: script iptables: service skeleton already provided!
insserv: warning: script 'courier-imap' missing LSB tags and overrides
Turning on process accounting, file set to '/var/log/account/pacct'.
Done..
Setting up bacula-sd-sqlite3 (5.0.2-2.2+squeeze1) …
Setting up bacula-server (5.0.2-2.2+squeeze1) …
Setting up bacula-fd (5.0.2-2.2+squeeze1) …
Starting Bacula File daemon…:.
Setting up bacula-client (5.0.2-2.2+squeeze1) …
Setting up bacula (5.0.2-2.2+squeeze1) …
Setting up proftpd-basic (1.3.3a-6squeeze6) …
Starting ftp server: proftpd.
Setting up mt-st (1.1-4) …
update-alternatives: using /bin/mt-st to provide /bin/mt (mt) in auto mode.
 

 

Once installed you will have 3 processes running in background used by Bacula backup system (bacula-dir, bacula-sd and bacula-fd)
root@pcfreak:~# ps ax |grep -i bacula|grep -v grep
6044 ? Ssl 0:00 /usr/sbin/bacula-dir -c /etc/bacula/bacula-dir.conf -u bacula -g bacula
6089 ? Ssl 0:00 /usr/sbin/bacula-sd -c /etc/bacula/bacula-sd.conf -u bacula -g tape
6167 ? Ssl 0:00 /usr/sbin/bacula-fd -c /etc/bacula/bacula-fd.conf

Here is what each of them does:

a) Bacula-dir or Bacula-Director is main Bacula Backup system component. Bacula-dir controls the whole backup system and the various other 2 daemons Bacula-FD and  Bacula-SD.

b) Bacula-fd – (Bacula File Daemon) acts as the interface between  Bacula network backup system and the filesystems to be backed up:  it  is  responsible for   reading/writing/verifying the files to be  backup'd/verified/restored. Network transfer can optionally be compressed.

c) Bacula-sd – (Bacula Storage Daemon) acts as interface between Bacula network backup system and Tape Drive or filesystem where backups will be stored

Each of 3 processes bacula-dir, bacula-fd and bacula-sd has their own init script in /etc/rc.d/, e.g.:

# /etc/init.d/bacula-directory
# /etc/init.d/bacula-fd
# /etc/init.d/bacula-sd

2. Configuring Bacula Backup System

Configuring Bacula is done via configuration files located in /etc/bacula

root@pcfreak:~# cd /etc/bacula
root@pcfreak:/etc/bacula# ls -1
bacula-dir.conf
bacula-fd.conf
bacula-fd.conf.dist
bacula-sd.conf
bacula-sd.conf.dist
bconsole.conf
common_default_passwords
scripts/
tray-monitor.conf

3. Defining what needs to be backed up

Here is a short description of most important configuration blocks in Bacula's main config bacula-dir.conf
 

1.Director resource defines the Director’s parameters. Name, Password, WorkingDirectory, and PidDirectory must be set. QueryFile specifies where the Director can find the SQL queries.

2.Job defines a backup or restore to perform. You will need at least one job per client. To simplify configuration of similar clients, create a common JobDefs resource and refer to it from within a Job. For example, if you have one set of defaults for desktops and another set for servers, you can create a Desktop and Server (these names are arbitrary and set with the Name attribute) JobDefs and refer to those two collections of settings from a Job.

3. Schedule resource is referred to within a Job to allow it to occur automatically.

4. FileSet resource defines which files are to be backed up. You can both Include and Exclude files.

5.Each Client resource details the clients that this Director can back up.

6.Storage resource specifies the storage daemon available to the Director.

7.Pool identifies a set of storage volumes (tapes/files) that Bacula can write data to. Each Pool can be configured to use different sets of tapes for different jobs.

8.Catalog resource defines Bacula catalog (database) to be used.

9. Messages resource captures where to send messages and which messages to send.
 

a) Defining directories to be backed up

Defining what needs to be backed up is done through bacula-dir.conf ( /etc/bacula/bacula-dir.conf ). In the file there is a FileSet section, where dirs to backed up have to be included, below config defines to backup /usr/sbin, /etc/, /root, /usr and /var directories
 

# List of files to be backed up
FileSet {
  Name = "Full Set"
  Include {
    Options {
      signature = MD5
    }
#   
#  Put your list of files here, preceded by 'File =', one per line
#    or include an external list with:
#
#    File = <file-name
#
#  Note: / backs up everything on the root partition.
#    if you have other partitions such as /usr or /home
#    you will probably want to add them too.
#
#  By default this is defined to point to the Bacula binary
#    directory to give a reasonable FileSet to backup to
#    disk storage during initial testing.
#
    File = /usr/sbin
    File = /root
    File = /etc
    File = /usr
    File = /var

  }

b) Defining where to store back ups

All configuration of where Bacula will store created backups is done through /etc/bacula/bacula-sd.conf

There are few configurations that needs to be tuned according to custom user purposes, below I paste them from config:
 

Storage {                             # definition of myself
  Name = pcfreak-sd
  SDPort = 9103                  # Director's port     
  WorkingDirectory = "/var/lib/bacula"
  Pid Directory = "/var/run/bacula"
  Maximum Concurrent Jobs = 20
  SDAddress = 127.0.0.1
}

Device {
  Name = FileStorage
  Media Type = File
  Archive Device = /nonexistant/path/to/file/archive/dir
  LabelMedia = yes;                   # lets Bacula label unlabeled media
  Random Access = Yes;
  AutomaticMount = yes;               # when device opened, read it
  RemovableMedia = no;
  AlwaysOpen = no;
}

Messages {
  Name = Standard
  director = pcfreak-dir = all

}

 

Storage sets working directory where temporary backups are created on backup creation time – default is /var/lib/bacula

Device – defines exact directory where backups will be stored after created – usually this is a directory with  mounted hard disk specially for backups. Bacula default is /nonexistant/path/to/file/archive/dir

Messages – configures where and what kind of messages are send on bacula operations

c) Configuring Bacula to create backups via network

Configuring where Bacula will act just on server localhost, or will bind and be visible to store backups via network IP is done from Bacula-FD (Bacula File Daemon).

By default it listens to localhost127.0.0.1. Bacula-FD configurations are done from /etc/bacula/bacula-fd.conf. Most important section configuring where bacula listens is named FileDaemon.
 

#
# "Global" File daemon configuration specifications
#
FileDaemon {                          # this is me
  Name = pcfreak-fd
  FDport = 9102                  # where we listen for the director
  WorkingDirectory = /var/lib/bacula
  Pid Directory = /var/run/bacula
  Maximum Concurrent Jobs = 20
  FDAddress = 127.0.0.1
}
 

 

By commenting FDAddress, Bacula will automatically listen to external IP configured on lan interface eth0

4. Managing Bacula Command Line Interfa – bconsole

Managing bacula interactively is done through bconsole (Bacula's Management Console) command.

root@pcfreak:~# bconsole

Connecting to Director localhost:9101
1000 OK: pcfreak-dir Version: 5.0.2 (28 April 2010)
Enter a period to cancel a command.
*
*help
  Command       Description
  =======       ===========
  add           Add media to a pool
  autodisplay   Autodisplay console messages
  automount     Automount after label
  cancel        Cancel a job
  create        Create DB Pool from resource
  delete        Delete volume, pool or job
  disable       Disable a job
  enable        Enable a job
  estimate      Performs FileSet estimate, listing gives full listing
  exit          Terminate Bconsole session
  gui           Non-interactive gui mode
  help          Print help on specific command
  label         Label a tape
  list          List objects from catalog
  llist         Full or long list like list command
  messages      Display pending messages
  memory        Print current memory usage
  mount         Mount storage
  prune         Prune expired records from catalog
  purge         Purge records from catalog
  python        Python control commands
  quit          Terminate Bconsole session
  query         Query catalog
  restore       Restore files
  relabel       Relabel a tape
  release       Release storage
  reload        Reload conf file
  run           Run a job
  status        Report status
  setdebug      Sets debug level
  setip         Sets new client address — if authorized
  show          Show resource records
  sqlquery      Use SQL to query catalog
  time          Print current time
  trace         Turn on/off trace to file
  unmount       Unmount storage
  umount        Umount – for old-time Unix guys, see unmount
  update        Update volume, pool or stats
  use           Use catalog xxx
  var           Does variable expansion
  version       Print Director version
  wait          Wait until no jobs are running

When at a prompt, entering a period cancels the command.

You have messages.
*
 

On run bconsole launches another service bacula-console.

root@pcfreak:~# ps ax |grep -i bacula-console|grep -v grep 13959 pts/5 Sl+ 0:00 /usr/sbin/bacula-console -c /etc/bacula/bconsole.conf

There are 4 tcp/ip ports via which communication between Bacula processes is done;

a) Communication from bconsole to Bacula is throigh Port Number 9101
b) Communication from bacula-dir to bacula-sd is done using Port Number 9103
c) bacula-dir to bacula-fd talks via Port Number 9102
d) Messages between Bacula-fd to bacula-sd is via port num 9103

Both of 4 ports are only listening on (127.0.0.1) / localhost and thus there is no security risk from external malicious users to enter Bacula remotely.

a) some essential commands while in bconsole shell

*show pools
Pool: name=Default PoolType=Backup
      use_cat=1 use_once=0 cat_files=1
      max_vols=0 auto_prune=1 VolRetention=1 year
      VolUse=0 secs recycle=1 LabelFormat=*None*
      CleaningPrefix=*None* LabelType=0
      RecyleOldest=0 PurgeOldest=0 ActionOnPurge=0
      MaxVolJobs=0 MaxVolFiles=0 MaxVolBytes=0
      MigTime=0 secs MigHiBytes=0 MigLoBytes=0
      JobRetention=0 secs FileRetention=0 secs
Pool: name=File PoolType=Backup
      use_cat=1 use_once=0 cat_files=1
      max_vols=100 auto_prune=1 VolRetention=1 year
      VolUse=0 secs recycle=1 LabelFormat=*None*
      CleaningPrefix=*None* LabelType=0
      RecyleOldest=0 PurgeOldest=0 ActionOnPurge=0
      MaxVolJobs=0 MaxVolFiles=0 MaxVolBytes=53687091200
      MigTime=0 secs MigHiBytes=0 MigLoBytes=0
      JobRetention=0 secs FileRetention=0 secs
Pool: name=Scratch PoolType=Backup
      use_cat=1 use_once=0 cat_files=1
      max_vols=0 auto_prune=1 VolRetention=1 year
      VolUse=0 secs recycle=1 LabelFormat=*None*
      CleaningPrefix=*None* LabelType=0
      RecyleOldest=0 PurgeOldest=0 ActionOnPurge=0
      MaxVolJobs=0 MaxVolFiles=0 MaxVolBytes=0
      MigTime=0 secs MigHiBytes=0 MigLoBytes=0
      JobRetention=0 secs FileRetention=0 secs
You have messages.

*status
Status available for:
     1: Director
     2: Storage
     3: Client
     4: All
Select daemon type for status (1-4):

*label
Automatically selected Catalog: MyCatalog
Using Catalog "MyCatalog"
Automatically selected Storage: File
Enter new Volume name:

*messages

b) Restoring Backups with bconsole

Restoring from backups is done with restore command

*restore
Automatically selected Catalog: MyCatalog
Using Catalog "MyCatalog"

First you select one or more JobIds that contain files
to be restored. You will be presented several methods
of specifying the JobIds. Then you will be allowed to
select which files from those JobIds are to be restored.

To select the JobIds, you have the following choices:
     1: List last 20 Jobs run
     2: List Jobs where a given File is saved
     3: Enter list of comma separated JobIds to select
     4: Enter SQL list command
     5: Select the most recent backup for a client
     6: Select backup for a client before a specified time
     7: Enter a list of files to restore
     8: Enter a list of files to restore before a specified time
     9: Find the JobIds of the most recent backup for a client
    10: Find the JobIds for a backup for a client before a specified time
    11: Enter a list of directories to restore for found JobIds
    12: Select full restore to a specified Job date
    13: Cancel
Select item:  (1-13):

 

Bacula can create backups on Tapes as well as tapes are still heavily used for backing data in some Banks, airports and other organizations where data is crucial.

Bacula is not among the easiest systems to create backups but for Backup administrators who work with Linux and FreeBSD it is great. Its scalability allows to make a very robust and complex backupping scheme which are hardly achievalable with other less professional backup tools like rsnapshot or rsync.
 

Create Easy Data Backups with Rsnapshot back-up tool on GNU / Linux

Monday, April 15th, 2013

 

rsnapshot Linux and FreeBSD easy data backup tool logo
Backing up information on Linux servers is essential part of routine system adminsitrator job. Thus I decided to write for those interested in how one can easily create backups of important data through a tiny tool called rsnapshot which I prior used to make periodic data incremental backups on few of Debian Linux servers I manage. In case you wonder why use rsnapshot and not just rsync – the reasons are 2.
a. Rsnapshot is very easy to configure and use and you don't need to have deep understanding on  rsync numerous options to use it.
b. Rsnapshot does support incremental data backups – saving a lot of disk space on backup host.

 

 

 

Mentioning  incremental data backups for some those term might be a news so I will in short explain here what is Incremental Data Backups?

Incremental Data Backups are such backups which only create new backup of system scheduled files to backup only whether there are changes in files to backup or new ones are added to directory/directories set to be routinely backed up. Incremental backups are often desirable as they consume minimum storage space and are quicker to perform than normal periodic whole data archiving (differential backups). rsync has also support for incremental backups but configuring it to do so takes time and requires extra time on reading and understanding how they work, so I personally prefer simplicity rsnapshot brings.

1. Installing rsnapshot with apt-get

Here is rsnapshot debian package description;

debian:~#  apt-cache show rsnapshot|grep -i description -A 5

 

Description: local and remote filesystem snapshot utility
 rsnapshot is an rsync-based filesystem snapshot utility. It can take
 incremental backups of local and remote filesystems for any number of
 machines. rsnapshot makes extensive use of hard links, so disk space is
 only used when absolutely necessary.
Homepage: http://www.rsnapshot.org/

As you can read from description, rsnapshot is a frontend command using rsync to make data backups.

Install of rsnapshot is done through;

 debian:~# apt-get install --yes rsnapshot

Reading package lists… Done
Building dependency tree      
Reading state information… Done
The following NEW packages will be installed:
  rsnapshot
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/140 kB of archives.
After this operation, 598 kB of additional disk space will be used.
Selecting previously deselected package rsnapshot.
(Reading database … 87026 files and directories currently installed.)
Unpacking rsnapshot (from …/rsnapshot_1.3.1-1_all.deb) … –
Processing triggers for man-db …
Setting up rsnapshot (1.3.1-1) …

2. Rsnapshot  package content and Documentation

Once installed here is file content of rsnapshot deb package;

debian:~# dpkg -L rsnapshot

 

/.
/usr
/usr/share
/usr/share/doc-base
/usr/share/doc-base/rsnapshot
/usr/share/doc
/usr/share/doc/rsnapshot
/usr/share/doc/rsnapshot/TODO
/usr/share/doc/rsnapshot/changelog.gz
/usr/share/doc/rsnapshot/Upgrading_from_1.1.gz
/usr/share/doc/rsnapshot/examples
/usr/share/doc/rsnapshot/examples/rsnapshot.conf.default.gz
/usr/share/doc/rsnapshot/examples/utils
/usr/share/doc/rsnapshot/examples/utils/backup_mysql.sh
/usr/share/doc/rsnapshot/examples/utils/mysqlbackup.pl
/usr/share/doc/rsnapshot/examples/utils/random_file_verify.sh
/usr/share/doc/rsnapshot/examples/utils/rsnapreport.pl.gz
/usr/share/doc/rsnapshot/examples/utils/make_cvs_snapshot.sh
/usr/share/doc/rsnapshot/examples/utils/backup_pgsql.sh
/usr/share/doc/rsnapshot/examples/utils/rsnapshotdb
/usr/share/doc/rsnapshot/examples/utils/rsnapshotdb/CHANGES.txt
/usr/share/doc/rsnapshot/examples/utils/rsnapshotdb/rsnapshotDB.pl.gz
/usr/share/doc/rsnapshot/examples/utils/rsnapshotdb/INSTALL.txt
/usr/share/doc/rsnapshot/examples/utils/rsnapshotdb/TODO.txt
/usr/share/doc/rsnapshot/examples/utils/rsnapshotdb/rsnapshotDB.xsd
/usr/share/doc/rsnapshot/examples/utils/rsnapshotdb/rsnapshotDB.conf.sample
/usr/share/doc/rsnapshot/examples/utils/rsnapshotdb/README.txt
/usr/share/doc/rsnapshot/examples/utils/rsnapshot-copy
/usr/share/doc/rsnapshot/examples/utils/backup_rsnapshot_cvsroot.sh
/usr/share/doc/rsnapshot/examples/utils/backup_dpkg.sh
/usr/share/doc/rsnapshot/examples/utils/sign_packages.sh
/usr/share/doc/rsnapshot/examples/utils/mkmakefile.sh
/usr/share/doc/rsnapshot/examples/utils/rsnaptar
/usr/share/doc/rsnapshot/examples/utils/rsnapshot_invert.sh
/usr/share/doc/rsnapshot/examples/utils/rsnapshot_if_mounted.sh
/usr/share/doc/rsnapshot/examples/utils/README
/usr/share/doc/rsnapshot/examples/utils/debug_moving_files.sh
/usr/share/doc/rsnapshot/examples/utils/backup_smb_share.sh
/usr/share/doc/rsnapshot/README.gz
/usr/share/doc/rsnapshot/changelog.Debian.gz
/usr/share/doc/rsnapshot/copyright
/usr/share/doc/rsnapshot/README.Debian
/usr/share/doc/rsnapshot/html
/usr/share/doc/rsnapshot/html/rsnapshot-HOWTO.en.html
/usr/share/doc/rsnapshot/NEWS.Debian.gz
/usr/share/lintian
/usr/share/lintian/overrides
/usr/share/lintian/overrides/rsnapshot
/usr/share/man
/usr/share/man/man1
/usr/share/man/man1/rsnapshot.1.gz
/usr/share/man/man1/rsnapshot-diff.1.gz
/usr/bin
/usr/bin/rsnapshot-diff
/usr/bin/rsnapshot
/var
/var/cache
/var/cache/rsnapshot
/etc
/etc/cron.d
/etc/cron.d/rsnapshot
/etc/rsnapshot.conf
/etc/logrotate.d
/etc/logrotate.d/rsnapshot

To get basic idea, on rsnapshot and how it can be configured and run manually as well as how it can be set-up to run periodic via a cronjob README shipped with package is a good start point.

debian:~# zless /usr/share/doc/rsnapshot/README.gz
....

It is also useful to check program documentation in HTML, whether you have some text browser installed – i.e. lynx or links:

debian:~# links /usr/share/doc/rsnapshot/html/rsnapshot-HOWTO.en.html

Note that many of information in rsnapshot-HOWTO is related to how rsnapshot is installed manually from source, so for Deb based distro users reading these sections can be safely skipped. For Debian users hence it is useful to read howto from section 4.A onwards. man rsnapshot's Examle section is very good reading too as it gives a lot of use scenarios necessary in more complicated backup situations.

3. Configuring Rsnapshot – Setting Data Directories to Backup

Configuration of Rsnapshot is done through /etc/rsnapshot.conf file. There is plenty of comments in file, so opening in text editor and taking few minutes to read commented lines is necessery. Configuration options just like with most Linux tool config files is done through config directives, not commented.

debian:~# cat /etc/rsnapshot.conf |grep -v "#"|uniq

 

 

config_version    1.2

snapshot_root    /var/cache/rsnapshot/

cmd_rm        /bin/rm

cmd_rsync    /usr/bin/rsync

cmd_logger    /usr/bin/logger

interval    hourly    6
interval    daily    7
interval    weekly    4

verbose        2

loglevel    3

lockfile    /var/run/rsnapshot.pid

backup    /home/        localhost/
backup    /etc/        localhost/
backup    /usr/local/    localhost/

 

 

Above config options are clear to understand, there is interval of backups to set (hourly, daily, weekly), verbose level of rsnapshot backup operation log file, lockfile which will be used by rsnapshot to prevent duplicate rsnapshot runs and last backup directive in which you need to specify what needs to be backed up. In config file there is also commented variable for creating rsnapshot backup once a month

#interval   monthly 3

If you need to create backups once a month uncomment it.

In backup directive add all directories from filesystem which need to have routine backup, for example I keep my Apache Web server files in /var/www/, store various install software in
/root/

and keep backup of Qmail (Vpopmail) old emails kept in
/var/vpopmail
.
To make rsnapshot backup those I add after rest of backup directives:

backup  /var/www/   localhost/
backup  /var/vpopmail/  localhost/
backup  /root/  localhost/


It is good practice to change snapshot_root directive to /root/.backups or whether you prefer to keep snapshot_root to default /var/cache/rsnapshot at least link with ln command /root/.backups to -> /root/.backups.

debian:~# ln -sf /var/cache/rsnapshot /root/.backups

If you change snapshot_root to /root/.backups, don't forget to create /root/.backups and set chmod  dir persmissions only readable to owner, i.e.:

debian:~# mkdir /root/.rsnapshot
debian:~# chmod -R 700 /root/.backups

Note that, it is important to use tab delimiters, everywhere in /etc/rsnapshot.conf, if you use space key delimiter instead of Tab you will end up with errors preventing rsnapshot to run.

4. Testing rsnapshot configuration and launching it first time

I will say it once again use Tab key for delimiters in config. It was my mistake on first time Rsnapshot launch to use spaces to delimiter my config options, thus testing my configuration, rsnapshot print an error and failed:

debian:~# rsnapshot configtest

 

———————————————————
rsnapshot encountered an error! The program was invoked with these options: /usr/bin/rsnapshot configtest ———————————————————
ERROR: /etc/rsnapshot.conf on line 199: ERROR: backup /var/www/ localhost/
ERROR: ———————————————————
ERROR: Errors were found in /etc/rsnapshot.conf, ERROR: rsnapshot can not continue. If you think an entry looks right, make
ERROR: sure you don't have spaces where only tabs should be.  

After changing, Space delimiters with Tabs and re-running rsnapshot configtest if all fine you get:

debian:~# rsnapshot configtest
Syntax OK

Once all good with config to launch Rsnapshot do its first complete incremental data backup, to display what rsnapshot will backup and what exact rsync invocations will it use type:


debian:~# rsnapshot -t hourly

echo 5644 > /var/run/rsnapshot.pid
mv /var/cache/rsnapshot/hourly.2/ /var/cache/rsnapshot/hourly.3/
mv /var/cache/rsnapshot/hourly.1/ /var/cache/rsnapshot/hourly.2/
native_cp_al("/var/cache/rsnapshot/hourly.0", \
    "/var/cache/rsnapshot/hourly.1")
/usr/bin/rsync -a –delete –numeric-ids –relative –delete-excluded /home \
    /var/cache/rsnapshot/hourly.0/localhost/
/usr/bin/rsync -a –delete –numeric-ids –relative –delete-excluded /etc \
    /var/cache/rsnapshot/hourly.0/localhost/
/usr/bin/rsync -a –delete –numeric-ids –relative –delete-excluded \
    /usr/local /var/cache/rsnapshot/hourly.0/localhost/
/usr/bin/rsync -a –delete –numeric-ids –relative –delete-excluded \
    /var/www /var/cache/rsnapshot/hourly.0/localhost/
/usr/bin/rsync -a –delete –numeric-ids –relative –delete-excluded \
    /var/vpopmail /var/cache/rsnapshot/hourly.0/localhost/
/usr/bin/rsync -a –delete –numeric-ids –relative –delete-excluded /root \
    /var/cache/rsnapshot/hourly.0/localhost/
touch /var/cache/rsnapshot/hourly.0/

To launch backup first time manually:

debian:~# rsnapshot hourly

Depending on backupped data (Mega/Giga/Terabytes) size and the number of files which had to be backed up, backup takes from minutes to hours.
Note that it is always good idea to create backups on separate hard disk configured in some kind of RAID array, preferrably (RAID 1 or RAID 5). Creating backups on separate hard disk has numerous advantages, the most important one is it doesn't put too much Input / Output (I/O) stress on hard disk and thus will not create server downtimes on High traffic – Busy servers slow old Hard Disks or servers with Big amount of I/O HDD read/writes .

5. Enabling Rsnapshot to create backups via scheduled cron job

On package install Rsnapshot creates a skele file for running via cronjob in /etc/cron.d/rsnapshot.

debian:~# cat /etc/cron.d/rsnapshot

 

 

# This is a sample cron file for rsnapshot.
# The values used correspond to the examples in /etc/rsnapshot.conf.
# There you can also set the backup points and many other things.
#
# To activate this cron file you have to uncomment the lines below.
# Feel free to adapt it to your needs.

# 0 */4        * * *        root    /usr/bin/rsnapshot hourly
# 30 3      * * *        root    /usr/bin/rsnapshot daily
# 0  3      * * 1        root    /usr/bin/rsnapshot weekly
# 30 2      1 * *        root    /usr/bin/rsnapshot monthly
 

To make hourly, daily, weekly, monthly backup uncomment one of above 4 lines. For paranoid admins scared to loose even a bit of data, hourly data is a good solution. For me personally I prefer configuring weekly backups for the reason I routinely monitor servers – keeping an eye regularly on dmesg and checking Linux smard / smartmontools logs to find out whether a hard disk or RAID has bad blocks

6. Checking backup size / backup difference and backup structure

Checking size of backups can be done by using standard du command on backup directory:

debian:~# du -hsc /var/cache/rsnapshot/*
4.3G /var/cache/rsnapshot/hourly.0
4.5M /var/cache/rsnapshot/hourly.1
68M /var/cache/rsnapshot/hourly.2
4.4G total

rsnapshot also has du argument via which backup size can be viewed:

debian:~# rsnapshot du 4.3G /var/cache/rsnapshot/hourly.0/
4.5M /var/cache/rsnapshot/hourly.1/
68M /var/cache/rsnapshot/hourly.2/
4.4G total

As you can see each new incremental backup is with new number after hourly{0,1,2} etc.

To check difference between two different backups:

debian:~# rsnapshot diff /var/cache/rsnapshot/hourly.0/ /var/cache/rsnapshot/hourly.1/
Comparing /var/cache/rsnapshot/hourly.1 to /var/cache/rsnapshot/hourly.0
Between /var/cache/rsnapshot/hourly.1 and /var/cache/rsnapshot/hourly.0:
660 were added, taking 3728377727 bytes;
492 were removed, saving 17623 bytes;

Structure of backed up files is identical to normal copy of files without any compression:

debian:~# cd /root/.backups/hourly.0/localhost/
debian:~/.backups/hourly.0/localhost# ls

etc/ home/ root/ usr/ var/

 

7. Restoing files or directory from rsnapshot backup

To restore lets say /var directory cd into it:

debian:~/.backups/hourly.0/localhost# cd var
debian:~/.backups/hourly.0/localhost/var#

Then use rsync as follows:

debian:~/.backups/hourly.0/localhost/var# rsync -avr * /
 

 

8. Creating rsnapshot backups from remote server via SSH protocol

In /etc/rsnapshot.conf you should have set SSH port on which remote server is accepting SSH connections. Standard port is 22, however it is wise to configure on backup server SSH to listen to some other non standard port.

In config variables to look on are:

ssh_args -p 22

and

Onwards to enable remote login via ssh uncomment in /etc/rsnapshot.conf :

# cmd_ssh /usr/bin/ssh

to

cmd_ssh /usr/bin/ssh

Before starting rsnapshot to create backups on remote host2 you need to Configure automatic SSH passwordless login by generating DSA or RSA key pair between host1 and host2. Where host1 is machine on which rsnapshot is run and to which backups will be copied from host2
Once passwordless ssh to remote host is active, to force rsnapshot create backups from host1 you will need to add near end of /etc/rsnapshot.conf .

backup  root@host2.com:/root/ host2.com/

The same way you can add a number of remote hosts from which periodic backups will be created to central host1. Only condition is on each node – host3, host4, host5.

backup  root@host3.com:/root/root/ host3.com
backup  root@host4.com:/home/ host4.com
backup  root@host4.com:/var/ host4.com

To create on host1 public key (id_dsa.pub) file with command:

debian:~# ssh-keygen -t dsa
...
....
debian:~# ssh-copy-id -i ~/.ssh/id_dsa.pub root@host3

Once all hosts that needs to get backed up to central backup host – host1. To test if backups gets uploaded manually issue:

debian:~# rsnapshot -v hourly
...

Rsnapshot has a number of other scripts which can be easily integrated with it in /usr/share/doc/rsnapshot/examples/utils.
Inside you can find example scripts on how to create MySQL / PostgreSQL database backup, Samba Share backups, backup CVS repositories and so on. The scripts can be easily modified and work with mostly any data or protocol with a bit of tweaking. Short description of each of example scripts can be found in /usr/share/doc/rsnapshot/examples/utils/README

Read Holy Bible on Linux with KDE GUI environment

Friday, April 5th, 2013

Whether you're Christian and you're into the habit to read daily a Chapter from Holy Bible and you use Linux with KDE environment on your Desktop, you definitely have to check BibleTime. BibleTime is one of Crosswire Sword Projects. The aim of project is to bring Holy Scriptures to people who spend long time in front of PC. Though Xiphos Bible reading app does the same Xiphos is build on top of GTK2 and targets GNOME users thus, if you're a KDE user and you prefer to use applications build on top of KDE's QT library it is preferable to use BibleTime.

Below is description of Debian package;

debian:~# apt-cache show bibletime|grep -i description -A 5

Description: A bible study tool for Qt
 BibleTime is a free and easy to use bible study tool.
 It uses the Qt and SWORD software libraries.
 BibleTime provides easy handling of digitized texts (Bibles, commentaries
 and lexicons) and powerful features to work with these texts (search in
 texts, write own notes, save, print etc.) in the SWORD module format.
 

debian:~# apt-get install bibletime
Reading package lists... Done
Building dependency tree      
Reading state information... Done
The following extra packages will be installed:
  bibletime-data
The following NEW packages will be installed:
  bibletime bibletime-data
0 upgraded, 2 newly installed, 0 to remove and 77 not upgraded.
Need to get 4,812 kB of archives.
After this operation, 16.1 MB of additional disk space will be used.
Do you want to continue [Y/n]? Y
....

Once installed to launch it invoke bibletime cmd:

debian:~$ bibletime

Libletime Holy Bible read in KDE Linux  reading tool launch screen

Just like with Xiphos, BibleTime KDE app supports installing extra Holy Bible texts in your mother language. To install additional Bible translations from:

Settings -> BookShelf Manager -> Languages

BibleTime read holy bible on Linux BookShelf Manager adding Holy Bible in additional languages

Then to choose default language in which default Holy Bible translation will appear use menus:

BibleTime Holy Bible Linux KDE reading program adding Holy Scripture additional language translations

 

One major disadvantage in BibleTime whether compared with Xiphos is it doesn't support Tabs. So there is no way to read in Parallel two different language translation of Holy Bible. Thus those wanting to stick to compare different versions of Holy Bible translations Install Xiphos

Install Sendmail mail server on Debian GNU / Linux

Sunday, March 31st, 2013

Installing sendmail on Debian Linux is something not so common these days. As sendmail has been overshadowed by his competitors Exim and Postfix. By default Debian Linux comes with Exim (light) installed as Exim is tiny and perfectly suitable for dealing with small and mid-sized SMTP needs. The reason why sendmail has been moved out by its competitors over the last 15 years is sendmail configuration is one big hell and besides that sendmail has been well known for its many security remote exploit holes – making it a famous target for crackers. Well anyways in some cases sendmail is necessary to install especially if you have a client which wants to have it set up. In this short article I will show how very basic sendmail installation on Debian host is done.

 blackstar:~# apt-get install sendmail-bin sensible-mda

Reading package lists… Done
Building dependency tree      
Reading state information… Done

The following extra packages will be installed:
  sendmail-base sendmail-cf sensible-mda
Suggested packages:
  sendmail-doc logcheck resolvconf sasl2-bin
The following packages will be REMOVED:
  exim4 exim4-base exim4-config exim4-daemon-light sa-exim task-mail-server
The following NEW packages will be installed:
  sendmail-base sendmail-bin sendmail-cf
0 upgraded, 3 newly installed, 6 to remove and 26 not upgraded.
Need to get 1,626 kB of archives.
After this operation, 592 kB disk space will be freed.
Do you want to continue [Y/n]? Y
Get:1 http://ftp.bg.debian.org/debian/ wheezy/main sendmail-base all 8.14.4-2.1 [362 kB]
Get:2 http://ftp.bg.debian.org/debian/ wheezy/main sendmail-cf all 8.14.4-2.1 [300 kB]
Get:3 http://ftp.bg.debian.org/debian/ wheezy/main sendmail-bin i386 8.14.4-2.1 [964 kB]
Fetched 1,626 kB in 0s (3,057 kB/s)  
(Reading database … 199577 files and directories currently installed.)
Removing task-mail-server …
Selecting previously unselected package sendmail-base.
(Reading database … 199577 files and directories currently installed.)
Unpacking sendmail-base (from …/sendmail-base_8.14.4-2.1_all.deb) …
Selecting previously unselected package sendmail-cf.
Unpacking sendmail-cf (from …/sendmail-cf_8.14.4-2.1_all.deb) …
Processing triggers for man-db …
(Reading database … 199939 files and directories currently installed.)
Removing sa-exim …
[….] Reloading exim4 configuration files:invoke-rc.d: initscript exim4, action "reload" failed.
dpkg: exim4-config: dependency problems, but removing anyway as you requested:
 exim4-base depends on exim4-config (>= 4.30) | exim4-config-2; however:
  Package exim4-config is to be removed.
  Package exim4-config-2 is not installed.
  Package exim4-config which provides exim4-config-2 is to be removed.
 exim4-base depends on exim4-config (>= 4.30) | exim4-config-2; however:
  Package exim4-config is to be removed.
  Package exim4-config-2 is not installed.
  Package exim4-config which provides exim4-config-2 is to be removed.

Removing exim4-config …
dpkg: exim4-daemon-light: dependency problems, but removing anyway as you requested:
 exim4 depends on exim4-daemon-light | exim4-daemon-heavy | exim4-daemon-custom; however:
  Package exim4-daemon-light is to be removed.
  Package exim4-daemon-heavy is not installed.
  Package exim4-daemon-custom is not installed.
 bsd-mailx depends on default-mta | mail-transport-agent; however:
  Package default-mta is not installed.
  Package exim4-daemon-light which provides default-mta is to be removed.
  Package mail-transport-agent is not installed.
  Package exim4-daemon-light which provides mail-transport-agent is to be removed.
 bsd-mailx depends on default-mta | mail-transport-agent; however:
  Package default-mta is not installed.
  Package exim4-daemon-light which provides default-mta is to be removed.
  Package mail-transport-agent is not installed.
  Package exim4-daemon-light which provides mail-transport-agent is to be removed.

Removing exim4-daemon-light …
[ ok ] Stopping MTA:.
ALERT: exim paniclog /var/log/exim4/paniclog has non-zero size, mail system possibly broken
dpkg: exim4-base: dependency problems, but removing anyway as you requested:
 exim4 depends on exim4-base (>= 4.80).

Removing exim4-base …
Processing triggers for man-db …
Selecting previously unselected package sendmail-bin.
(Reading database … 199786 files and directories currently installed.)
Unpacking sendmail-bin (from …/sendmail-bin_8.14.4-2.1_i386.deb) …
Processing triggers for man-db …
Setting up sendmail-base (8.14.4-2.1) …
adduser: Warning: The home directory `/var/lib/sendmail' does not belong to the user you are currently creating.
Setting up sendmail-cf (8.14.4-2.1) …
Setting up sendmail-bin (8.14.4-2.1) …
update-rc.d: warning: default stop runlevel arguments (0 1 6) do not match sendmail Default-Stop values (1)
update-alternatives: using /usr/lib/sm.bin/sendmail to provide /usr/sbin/sendmail-mta (sendmail-mta) in auto mode
update-alternatives: using /usr/lib/sm.bin/sendmail to provide /usr/sbin/sendmail-msp (sendmail-msp) in auto mode
update-alternatives: warning: not replacing /usr/share/man/man8/sendmail.8.gz with a link

You are doing a new install, or have erased /etc/mail/sendmail.mc.
If you've accidentaly erased /etc/mail/sendmail.mc, check /var/backups.

I am creating a safe, default sendmail.mc for you and you can
run sendmailconfig later if you need to change the defaults.

[ ok ] Stopping Mail Transport Agent (MTA): sendmail.
Updating sendmail environment …
Validating configuration.
Writing configuration to /etc/mail/sendmail.conf.
Writing /etc/cron.d/sendmail.
Could not open /etc/mail/databases(No such file or directory), creating it.
Could not open /etc/mail/sendmail.mc(No such file or directory)
Reading configuration from /etc/mail/sendmail.conf.
Validating configuration.
Writing configuration to /etc/mail/sendmail.conf.
Writing /etc/cron.d/sendmail.
Turning off Host Status collection
Could not open /etc/mail/databases(No such file or directory), creating it.
Reading configuration from /etc/mail/sendmail.conf.
Validating configuration.
Creating /etc/mail/databases…

Checking filesystem, this may take some time – it will not hang!
  …   Done.
 
Checking for installed MDAs…
Adding link for newly extant program (mail.local)
Adding link for newly extant program (procmail)
sasl2-bin not installed, not configuring sendmail support.

To enable sendmail SASL2 support at a later date, invoke "/usr/share/sendmail/update_auth"

 
Creating/Updating SSL(for TLS) information
Creating /etc/mail/tls/starttls.m4…
Creating SSL certificates for sendmail.
Generating DSA parameters, 2048 bit long prime
This could take some time
…+………………..+.+..+..+++
..+.+………….+.++++++++++++++++++++++++++++++*
Generating RSA private key, 2048 bit long modulus
………………..+++
…………………+++
e is 65537 (0x10001)

*** *** *** WARNING *** WARNING *** WARNING *** WARNING *** *** ***

Everything you need to support STARTTLS (encrypted mail transmission
and user authentication via certificates) is installed and configured
but is *NOT* being used.

To enable sendmail to use STARTTLS, you need to:
1) Add this line to /etc/mail/sendmail.mc and optionally
   to /etc/mail/submit.mc:
  include(`/etc/mail/tls/starttls.m4')dnl
2) Run sendmailconfig
3) Restart sendmail

 
Updating /etc/hosts.allow, adding "sendmail: all".

Please edit /etc/hosts.allow and check the rules location to
make sure your security measures have not been overridden –
it is common to move the sendmail:all line to the *end* of
the file, so your more selective rules take precedence.
Checking {sendmail,submit}.mc and related databases…
Reading configuration from /etc/mail/sendmail.conf.
Validating configuration.
Creating /etc/mail/databases…
Reading configuration from /etc/mail/sendmail.conf.
Validating configuration.
Creating /etc/mail/databases…
Reading configuration from /etc/mail/sendmail.conf.
Validating configuration.
Creating /etc/mail/Makefile…
Reading configuration from /etc/mail/sendmail.conf.
Validating configuration.
Writing configuration to /etc/mail/sendmail.conf.
Writing /etc/cron.d/sendmail.
Disabling HOST statistics file(/var/lib/sendmail/host_status).
Creating /etc/mail/sendmail.cf…
*** ERROR: FEATURE() should be before MAILER()
*** MAILER(`local') must appear after FEATURE(`always_add_domain')*** ERROR: FEATURE() should be before MAILER()
*** MAILER(`local') must appear after FEATURE(`allmasquerade')*** ERROR: FEATURE() should be before MAILER()
 
Creating /etc/mail/submit.cf…
Informational: confCR_FILE file empty: /etc/mail/relay-domains
Warning: confCT_FILE source file not found: /etc/mail/trusted-users
 it was created
Informational: confCT_FILE file empty: /etc/mail/trusted-users
Warning: confCW_FILE source file not found: /etc/mail/local-host-names
 it was created
Warning: access_db source file not found: /etc/mail/access
 it was created
Updating /etc/mail/access…
Linking /etc/aliases to /etc/mail/aliases
Updating /etc/mail/aliases…

WARNING: local host name (blackstar) is not qualified; see cf/README: WHO AM I?
/etc/mail/aliases: 13 aliases, longest 10 bytes, 145 bytes total
 
Warning: 3 database(s) sources
    were not found, (but were created)
    please investigate.
 
Warning: These messages were issued while creating sendmail.cf
    make sure they are benign before starting sendmail!
 
Errors in generating sendmail.cf
*** ERROR: FEATURE() should be before MAILER()
*** MAILER(`local') must appear after FEATURE(`always_add_domain')*** ERROR: FEATURE() should be before MAILER()
*** MAILER(`local') must appear after FEATURE(`allmasquerade')*** ERROR: FEATURE() should be before MAILER()
 
[ ok ] Starting Mail Transport Agent (MTA): sendmail.
(Reading database … 199837 files and directories currently installed.)
Removing exim4 …
 

Right after packages gets installed it is good idea to get rid of any remains of previous exim SMTP install, run;

blackstar:~# dpkg --purge exim4
blackstar:~# dpkg --purge exim4-base
blackstar:~# dpkg --purge exim4-config
blackstar:~# dpkg --purge exim4-daemon-light
blackstar:~# dpkg --purge sa-exim

blackstar:~# grep -i sendmail /etc/passwd
smmta:x:121:128:Mail Transfer Agent,,,:/var/lib/sendmail:/bin/false
smmsp:x:124:129:Mail Submission Program,,,:/var/lib/sendmail:/bin/false
blackstar:~# grep -i -E "smmta|smmsp" /etc/passwd
smmta:x:121:128:Mail Transfer Agent,,,:/var/lib/sendmail:/bin/false
smmsp:x:124:129:Mail Submission Program,,,:/var/lib/sendmail:/bin/false

Sendmail install does create two new users smmta and smmsp in /etc/passwd and /etc/group

As you see from earlier apt-get output sendmail is provided on Debian via 4 packs:

root@blackstar:~# dpkg -l |grep -i sendmail
ii  libmail-sendmail-perl                0.79.16-1                          all          Send email from a perl script
ii  sendmail-base                        8.14.4-2.1                         all          powerful, efficient, and scalable Mail Transport Agent
ii  sendmail-bin                         8.14.4-2.1                         i386         powerful, efficient, and scalable Mail Transport Agent
ii  sendmail-cf                          8.14.4-2.1                         all          powerful, efficient, and scalable Mail Transport Agent

libmail-sendmail-perl installs a perl module (class)  /usr/share/perl5/Mail/Sendmail.pm.

sendmail-bin contains main sendmail components binary files, cron bindings related to sendmail, some manual pages and creates structure necessary for sendmail to process email queue. sendmail-cf provides a multitude of sendmail configurations in macroses and few documentation files on the macros configuration. All sendmail configuration macros are stored in /usr/share/sendmail/* – there are pleny of .m4 configs so for people who never installed sendmail it is really confusing.

sendmail-base package contains some bindings on how to to log rotate sendmail log files, few more sendmail binaries who deal with sendmail architecture, few files whether sendmail is run via PPP or DHCP connection, some documentation and example files. Sendmail documentation is installed in /usr/share/doc/sendmail*,  unfortunately documentation there is scarce so for extended documentation it is good to check Sendmail's Official site

To check if sendmail is running you should have it visible  in the list of running processes;

root@blackstar:~# ps xa|grep sendmail|grep -v grep
  468 ?        Ss     0:00 sendmail: MTA: accepting connections        

Further on it should be accepting connections on localhost / 25, i.e.

root@blackstar:~# telnet localhost 25
Trying ::1...
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
220 blackstar ESMTP Sendmail 8.14.4/8.14.4/Debian-2.1; Sat, 30 Mar 2013 19:09:47 +0200; (No UCE/UBE) logging access from: localhost(OK)-localhost [127.0.0.1] ^]
telnet> quit
 

 

Sendmail's configuration is being generated using a macro file using a macro processor via m4 command. There are few files, used as a basis for generation the final m4 most important of course is /etc/mail/sendmail.mc and sendmail.cf  –  /etc/mail/sendmail.cf, sendmail.mc after processed with the mambo-jambo with m4 generates the complex and about 15 times larger by size sendmail.cf.
All configs related to generating files instructing how sendmail will operate are stored in /etc/mail;

blackstar:~#  ls -1
access
access.db
address.resolve
aliases
aliases.db
databases
helpfile
local-host-names
m4
Makefile
peers
sasl
sendmail.cf
sendmail.cf.errors
sendmail.conf
sendmail.mc
service.switch
service.switch-nodns
smrsh
spamassassin
submit.cf
submit.mc
tls

sendmail.cf.errors
– contains errors during processing of macros config files.

 

root@blackstar:/etc/mail# cat sendmail.cf.errors
*** ERROR: FEATURE() should be before MAILER()
*** MAILER(`local') must appear after FEATURE(`always_add_domain')*** ERROR: FEATURE() should be before MAILER()
*** MAILER(`local') must appear after FEATURE(`allmasquerade')*** ERROR: FEATURE() should be before MAILER()

This errors, are not fatal as sendmail.cf is there and sendmail is from now on ready to send mails via localhost.

To check if sendmail delivers mails onwards, use mail cmd;
 

hipo@blackstar:~$ mail -s "testing" test@pc-freak.net
this is a simple test email
Do you get it?
.
Cc:

To see all is fine with mail delivery check out /var/log/mail.log

blackstar:~# tail -f /var/log/mail/log
Mar 30 21:23:05 blackstar sm-msp-queue[1495]: unable to qualify my own domain name (blackstar) -- using short name
Mar 30 21:23:09 blackstar sm-mta[1499]: STARTTLS=client, relay=mail.pc-freak.net., version=TLSv1/SSLv3, verify=FAIL, cipher=AES256-SHA, bits=256/256
Mar 30 21:23:11 blackstar sm-mta[1524]: r2UJN8x2001524: localhost [127.0.0.1] did not issue MAIL/EXPN/VRFY/ETRN during connection to MTA-v4
Mar 30 21:23:13 blackstar sm-mta[1499]: r2UJKwqR001412: to=<hipo@pc-freak.net>, ctladdr=<root@blackstar> (0/0), delay=00:02:15, xdelay=00:00:10, mailer=esmtp, pri=210313, relay=mail.pc-freak.net. [83.228.93.76], dsn=2.0.0, stat=Sent (ok 1364671405 qp 7492)
Mar 30 21:24:28 blackstar sendmail[1532]: My unqualified host name (blackstar) unknown; sleeping for retry
Mar 30 21:27:16 blackstar sendmail[1633]: My unqualified host name (blackstar) unknown; sleeping for retry

As you see there is an error in mail.log
 

blackstar sendmail[1532]: My unqualified host name (blackstar) unknown; sleeping for retry


This is because blackstar is not assigned as a a host recognized to 127.0.0.1 in /etc/hosts. To solve it on my host I had to change /etc/hosts which looked like so:

blackstar:~# cat /etc/hosts
127.0.0.1    localhost
127.0.1.1    blackstar
# The following lines are desirable for IPv6 capable hosts
::1     localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

to

blackstar:~# vim /etc/hosts

127.0.0.1    localhost localhost.localdomain blackstar
127.0.1.1    blackstar

# The following lines are desirable for IPv6 capable hosts
::1     localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
 

 

Then restart sendmail to reread /etc/hosts
 

root@blackstar:/etc/mail# /etc/init.d/sendmail restart
[ ok ] Restarting Mail Transport Agent (MTA): sendmail.

 

How to upgrade single package with their dependencies on Debian and Ubuntu Linux

Friday, March 16th, 2012

Debian GNU / Linux apt-get upgrade a package selection of a whole bunch of packages ready to upgrade apt artistic logo

Are you a Debian System Administrator and you recently run apt-get upgrade && apt-get upgrade finding out there are plenty of new packagesfor upgrade? Do you need only a pre-selected number of packages to upgrade with apt?
I run apt-get update && apt-get upgrade on one of our company Debian servers, just to see there are a number of packages to be upgraded among which there was some I didn't wanted to upgrade. Here is a little paste output from apt-get upgrade:

debian:~# apt-get update && apt-get upgrade
Hit http://security.debian.org squeeze/updates Release.gpg
...
Hit http://security.debian.org squeeze/updates/main amd64 Packages
Fetched 128 kB in 0s (441 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be upgraded:
at imagemagick libdbd-pg-perl libfreetype6 libmagickcore3 libmagickcore3-extra libmagickwand3 libmysqlclient16 mysql-client
mysql-client-5.1 mysql-common mysql-server mysql-server-5.1 mysql-server-core-5.1
Do you want to continue [Y/n]
14 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

From first sight it seems logical to issue apt-get upgrade packagename to upgrade only single package with its package dependencies, instead of the whole group the above packs. However doing:
apt-get upgrade imagemagick will still try to upgrade all the packages instead of just imagemagick and its dependency package deb libmagickcore3

debian:~# apt-get upgrade imagemagick
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be upgraded:
at imagemagick libdbd-pg-perl libfreetype6 libmagickcore3 libmagickcore3-extra libmagickwand3 libmysqlclient16 mysql-client
mysql-client-5.1 mysql-common mysql-server mysql-server-5.1 mysql-server-core-5.1
14 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Do you want to continue [Y/n]

Doing all package,upgrade is not a good idea in my case, since upgrading mysql-server will require a MySQL server restart (something which we cannot afford to do right now) on this production server.
MySQL server restart during upgrade is never a good idea especially on productive busy (heavy loaded) SQL servers.
A restart of the MySQL server serving thousands of requests per second could lead often to crashed tables and hence temporary server downtime etc.

Still it is a good idea to upgrade the rest of packages with their newer versions. For exmpl. to upgrade; imagemagick, at , libfreetype6 and so on.

In order to upgrade only this 3 ones and their respective package dependencies, issue:

debian:~# apt-get --yes install imagemagick at libfreetype6

Repeat the apt-get install command with passing all the single package name you want to be upgraded and voila you're done :).
Be sure the apt-get install packagename upgrade doesn't require also upgrade of myssql-server, mysql-client, mysql-common or mysql-server-core-5.1 or any of the package name you want to preserve from upgrading.