Comment on How to install and configure Canon Pixma iP3300 printer for color printing on Ubuntu and Debian Linux by admin.
If the printer is not recognized go to:
Go to System -> Administration -> Printing
and click over New.
The printer should appear in list
with a name ip3300 Ver.2.70
It appears this printer has a special maintenance functions which you can access from terminal/console.
To access the pixma ip3300 maintenance functions exec:
cngpij -P iP3300-Ver.2.70
NB! I’ve red online that in some cases a copy of the canonip3300.ppd file which is found in the .tgz files from /usr/share/cups/model/ to
/usr/share/ppd/pstocanonbj/ might be necessary.
This method has been used to install the driver to an Acer Travelmate 4233WLMi laptop and my other system. This method is a hotchpotch of different forum threads about Canon printers.
admin Also Commented
How to install and configure Canon Pixma iP3300 printer for color printing on Ubuntu and Debian Linux
Hi,
When I have time will have to see and walk through the installation once again, cause the installation I made was for my cousin on her Ubuntu’s.
You might be right I’m too pesimistic about revelations could be.
You’re right about ubuntu, it has to be more easier than it is at this stage, but this is Linux. It’s advancing but it’s slow.
btw I’m not even sure if Turboprint will be capable to make the printer work.
Did you get some specific error, when you try to print out a page?
How to install and configure Canon Pixma iP3300 printer for color printing on Ubuntu and Debian Linux
Also don’t forget to also check the printer guide.
Here is the pixma ip3300 printer guide http://www.pc-freak.net/files/canon-linux-drivers/guideip3300-pd-2.70-1.tar.gz
Recent Comments by admin
Install and configure rkhunter for improved security on a PCI DSS Linux / BSD servers with no access to Internet
–rwo, –report-warnings-only
This option causes only warning messages to be displayed. This can be useful when rkhunter is run via cron. Other options may
be used to force other items of information to be displayed.
–sk, –skip-keypress
When the –check command option is used, after certain sections of tests, the user will be prompted to press the return key
in order to continue. This option disables that feature, and rkhunter will run until all the tests have completed.
Install and configure rkhunter for improved security on a PCI DSS Linux / BSD servers with no access to Internet
As rkhunter check, can be pretty annoying and ask you to press keypresses multiple times and spit you a lot of unnecessery data a very good useful option arguments are:
–rwo and –sk
# rkhunter -c –rwo –sk
Warning: The SSH and rkhunter configuration options should be the same:
SSH configuration option 'PermitRootLogin': yes
Rkhunter configuration option 'ALLOW_SSH_ROOT_USER': no
Sorry for really late reply.
perhaps you have to create it or rename the ifcfg-eno1 to ifcfg-eth1 or you have some old ifcfg-enp1s0f0 or ifcfg-eno still under /etc/sysconfig/network-scripts/ interfering
How to RPM update Hypervisors and Virtual Machines running Haproxy High Availability cluster on KVM, Virtuozzo without a downtime on RHEL / CentOS Linux
if you happen to be missing versionlock plugin and you need to get use of it
yum versionlock capabilities
You will have to install yum-utils package:
For example on CentOS 8 Linux, to enable the yum versionlock plugiun
yum install yum-utils.noarch
In case if by default log is not configured for snoopy,
these are default output locations on various Linux distributions:
Distribution | Snoopy output location | Notes |
---|---|---|
CentOS |
/var/log/secure
|
|
Debian |
/var/log/auth.log
|
|
Ubuntu |
/var/log/auth.log
|
|
(others) |
/var/log/messages
|
(potentially, could be elsewhere) |