Comment on Nokia 9300i Communicator with final firmware Symbian version 6.27 still contains an old telephone hanging bug by admin.
Hi,
My firmware update was done by a phone repair specialist.
So the firmware of 6.27 which I got I’ve never installed myself and I believe it’s dangerous to do it on your own.
I remember some links to the software were online and were downlodable some time ago but I’ve never tested them myself. So generally speaking the 6.27 firmware update might break your phone. You better ask a specialist to do it for you and pay some minimal fee let’s say 10 EUR or smth.
Hope this helps.
BR
admin Also Commented
Unfortunately there is no easy way if there is at all that you make a flush of the phone at home.
I personally flushed my firmware in a phone repair little shop where a friend of mine was working he told me he used a special programming device for Nokia phones and then again he had to transfer the whole firmware over 2 cables. I don’t really know how he did it but he achieved it. The firmware phone flush, costed me like 10 EUR. So I guess it’s not worthy to take the effort to make it on your own.
Regards,
Georgi
Recent Comments by admin
Install and configure rkhunter for improved security on a PCI DSS Linux / BSD servers with no access to Internet
–rwo, –report-warnings-only
This option causes only warning messages to be displayed. This can be useful when rkhunter is run via cron. Other options may
be used to force other items of information to be displayed.
–sk, –skip-keypress
When the –check command option is used, after certain sections of tests, the user will be prompted to press the return key
in order to continue. This option disables that feature, and rkhunter will run until all the tests have completed.
Install and configure rkhunter for improved security on a PCI DSS Linux / BSD servers with no access to Internet
As rkhunter check, can be pretty annoying and ask you to press keypresses multiple times and spit you a lot of unnecessery data a very good useful option arguments are:
–rwo and –sk
# rkhunter -c –rwo –sk
Warning: The SSH and rkhunter configuration options should be the same:
SSH configuration option 'PermitRootLogin': yes
Rkhunter configuration option 'ALLOW_SSH_ROOT_USER': no
Sorry for really late reply.
perhaps you have to create it or rename the ifcfg-eno1 to ifcfg-eth1 or you have some old ifcfg-enp1s0f0 or ifcfg-eno still under /etc/sysconfig/network-scripts/ interfering
How to RPM update Hypervisors and Virtual Machines running Haproxy High Availability cluster on KVM, Virtuozzo without a downtime on RHEL / CentOS Linux
if you happen to be missing versionlock plugin and you need to get use of it
yum versionlock capabilities
You will have to install yum-utils package:
For example on CentOS 8 Linux, to enable the yum versionlock plugiun
yum install yum-utils.noarch
In case if by default log is not configured for snoopy,
these are default output locations on various Linux distributions:
Distribution | Snoopy output location | Notes |
---|---|---|
CentOS |
/var/log/secure
|
|
Debian |
/var/log/auth.log
|
|
Ubuntu |
/var/log/auth.log
|
|
(others) |
/var/log/messages
|
(potentially, could be elsewhere) |