I’ve even already had the chance to have a paper …

Thursday, 25th April 2024

Comment on Enable printing from Windows and Macs remotely through Linux Print server – Share Brother Printer DCP-1610W with Linux CUPS and Samba Windows Share by admin.

I’ve even already had the chance to have a paper jam stucked when I tried to print one image from my Windows desktop.

I’m not sure whether the problem is because of a faulty driver in printing the image or it is the amount of paper I placed in the printer pan.

Or it could be the fact I tried to use the same paper over and over again and it was already smashed and part of the papers in the pan were not really well placed but anyways the paper got stucked and I have to watch a small video to figure out how to remove the stucked paper.

Here is the Support link from Brother’s site, in case it happens to you to:

http://support.brother.com/g/b/faqend.aspx?c=eu_ot&lang=en&prod=dcp1610w_eu_as&ftype3=1969&faqid=faq00000308_023

Regards,
Georgi

admin Also Commented

Enable printing from Windows and Macs remotely through Linux Print server – Share Brother Printer DCP-1610W with Linux CUPS and Samba Windows Share
If you wonder which user you have to use to login to the CUPS Administrative interface.

you have to use some of the local machine /etc/passwd users that could be any user that has the permissions to modify stuff with cups, but usually it can be the user:
root  itself with the respective password. You can also set a special user to login for cups and I guess you can also setup the default administrator if you like though.

 


Enable printing from Windows and Macs remotely through Linux Print server – Share Brother Printer DCP-1610W with Linux CUPS and Samba Windows Share
And yes Linux is really nice as always, Hooray now I have a homebrew printing server at no cost 🙂


Recent Comments by admin

Big Church Scandal in the Bulgarian Orthodox Church the developments on how the Church basic law Establishment document is illegally broken and hope and action for truth to be restored

What is rather fun is during the anti-protest organized by Metropolitan Nikolay (with people only from the Plovdiv eparchy just like in the good old times of communism was financed by the unwilling people to go to the event). It was lied that the reason for Nikolay people to protest is because this is a protest in front of the Synod against the accepting of gay marriages (what a lie !!!). Besides that there is a many people from village called Krepost (if not mistaken the village) who were (protestants!) and came to protest in favour of the new anti people legislation (even though not orthodox christians), because they were mislead the protests are against the gays!

Metropolitan Nikolay has publicly asked priests in his eparchy to sign a document they're going to be present on the protests that should support the New Synodal "order". Those who were unwilling to cooperate of course can always be sent by their Metropolitan to a very distant village or even taken away their profession as priests so there was a lot of pressure put on those people.


A Biography of one big Heart + His Holiness Patriarch Neophyte (Neofit) head of Bulgarian Orthodox Church

От архива: Христовата любов побеждава дори смъртта, твърдеше приживе патриарх Неофит


A Biography of one big Heart + His Holiness Patriarch Neophyte (Neofit) head of Bulgarian Orthodox Church

Българският Патриарх Неофит в Москва на 8 Март 2016 г. ЧАСТ 2
 


Christ is Risen Eastern Orthodox Resurrection Paschal Greeting in Different Languages
Hi Stan,

I guess you cannot read the writtings on the icon as it is in cyrillic.
This is not Saint Mary and Saint Peter but Adam and Eve written in cyrillic on top of the icon.
Actually in orthodoxy it is a requirement for the depicted personalities, especially saints to have
written on the names of the saint and have the Halo. If you look closely at the picture you will notice
the two Adam and Eve are missing a Halo. The only person with a Halo in the icon is Saint John the Baptist.

Best Regards
Georgi


Install and configure rkhunter for improved security on a PCI DSS Linux / BSD servers with no access to Internet
       –rwo, –report-warnings-only
              This option causes only warning messages to be displayed. This can be useful when rkhunter is run via cron. Other options may
              be used to force other items of information to be displayed.

       –sk, –skip-keypress
              When  the  –check command option is used, after certain sections of tests, the user will be prompted to press the return key
              in order to continue. This option disables that feature, and rkhunter will run until all the tests have completed.

         


Share this on:

Comments are closed.