Archive for January 18th, 2012

How to install Samsung ML-2010 (ML-2010P) Mono Laser Printer on Xubuntu GNU/Linux

Wednesday, January 18th, 2012

I had to make one old Samsung ML-2010P Laser Printer work on Xubuntu Linux . I've had some issues in installing it, I couldn't fine any step by step tutorial online, on how the printer can be made work fine on Linux. Therefore I took the time to experiment and see if I could make it work. Since the printer is old, not much people are interested any more in making the printer operational on Linux, hence I couldn't find too much relevant posts and sites on the net, anyways thanks God after a bit of pondering I finally succeeded to make the Samsung ML-2010P printer to print on Linux.This are the exact steps one has to follow to make this old bunch of hardware to play nice on Linux:

1. use lsusb to list the printer model

root@linux:~# lsusb |grep -i samsung
Bus 001 Device 003: ID 04e8:326c Samsung Electronics Co., Ltd ML-2010P Mono Laser Printer

You see the printer reports as Samsung Electronics Co., Ltd ML-2010P Mono Laser Printer

2. Install cups printing service required packages

root@linux:~# apt-get install cups cups-bsd cups-client cups-common
root@linux:~# apt-get install cups-driver-gutenprint ghostscript-cups
root@linux:~# apt-get install python-cups python-cupshelpers

3. Install foomatic packages

root@linux:~# apt-get install foomatic-db foomatic-db-engine foomatic-db-gutenprint
root@linux:~# apt-get install foomatic-filters python-foomatic

4. Install hpijs hplip printconfand other packages necesssery for proper printer operation

root@linux:~# apt-get install hpijs hplip hplip-data ijsgutenprint
root@linux:~# apt-get install min12xxw openprinting-pdds printconf foo2zjs

P.S. Some of the packages I list might already have been installed as a dependency to another package, as I'm writting this article few days after I've succeeded installing the printer, I don't remember the exact install order.

5. Install splix (SPL Driver for Unix)

Here is a quote taken from Spix's project website:

"SpliX is a set of CUPS printer drivers for SPL (Samsung Printer Language) printers.
If you have a such printer, you need to download and use SpliX. Moreover you will find documentation about this proprietary language.
"

root@linux:~# apt-get install splix

For more information on splix, check on Splix SPL driver for UNIX website http://splix.ap2c.org/

You can check on the projects website the Samsung ML 2010 Printer is marked as Working
Next step is to configure the Printer

6. Go to Cups interface on localhost in browser and Add the Samsung printer.

Use Firefox, SeaMonkey or any browser of choice to configure CUPS:

Type in the browser:

http://localhost:631

Next a password prompt will appear asking for a user/pass. The user/pass you have to use is the same as the password of the user account you're logged on with.

UNIX Linux Administration CUPS Printer adding Samsung ML 2010 ML-2010P Xubuntu

Click on the Add Printer button and choose to add the Samsung ML-2010.

Then restart the CUP Service (cupsd) to make it load the new settings:

root@linux:~# /etc/init.d/cups restart

Now give the printer a try in printing some page in SeaMonkey, Chrome or Firefox (the quickest way is through pressing CTRL + P )

Following this steps, I've managed to run the printer on Xubuntu Linux, though the same steps if followed should most probably make the Samsnung ML 2010 play nice with other Linux distributions with a little or no adjustments.
I'll be glad to hear if someone succeeded in making the printer work on other distributions, if so please drop me a comment.
That's all folks! Enjoy printing ;)

Share this on